535615424 Lucas-Girling Brake Caliper; Rear Right; New
Click the image to expand

Lucas-Girling Brake Caliper; Rear Right; New | 535615424

VW Jetta, Passat, Golf, Corrado, Quantum
Not Available Status
Not Available
Loading...

Make Sure It Fits

P/N: 535615424 Lucas-Girling
Description:
Rear Right; New
For models with rear disc brakes, 10mm bleeder screw and cable attachment at bottom of caliper (not 7mm bleeder and top cable as in earlier models.) 1 per car. PERMANENT NLA
Cross References:
  • BHN129
  • W01331837373

Brake calipers are the hydraulic clamps that create the friction needed to slow and stop VW models equipped with disc brakes. They function by using hydraulic fluid to force pistons inside the caliper to press brake pads on both sides of the brake rotor. The friction created by the brake pads pressing against the rotor slows the rotation of the rotor until it eventually stops turning. Every time you press on the brake pedal, hydraulic fluid is sent to the brake calipers for them to engage the pads.

Brake calipers are machined parts and are designed for the life of your VW. However, they do have seals and boots that can wear out and moisture can cause the calipers, caliper pistons, and brake bleeder screws to rust.

Replacing Your VW Brake Calipers
  • Replacing brake calipers requires the caliper to be disconnected from the brake hydraulic line and unbolted from the steering knuckle or wheel spindle.
  • Before bolting on a new brake caliper, it should be fitted with new brake pads and the brake rotor should be replaced.
  • Once the new brake caliper is bolted on the steering knuckle or wheel spindle and the brake hydraulic line is reconnected, the brake caliper and other calipers on the vehicle must be bled to remove all air from the brake hydraulic system.
  • The brake calipers can be bled by pumping the brake pedal and holding it pressed then loosening the bleeder screw on the caliper.
  • Once the bleeder screw is loosened, air will be forced out of the caliper being replaced by brake fluid and the brake pedal will drop to the floor.
  • Before releasing the brake pedal the bleeder screw must be tightened to prevent air from entering back into the caliper when the pedal is released.
  • This process must be repeated until no air comes out of the caliper and then repeated for each caliper to remove all air from the brake hydraulic system.

View more VW Brake Calipers.

Left = Driver side and Right = Passenger side.
All parts are priced individually unless identified as a set or kit. "Per car" notes identify how many of a given part your car has and "Left/Right or Front/Rear" notes means the part fits the left or right side of the car. These parts are still sold individually and you'll need to select the appropriate quantity if you plan to replace more than one of this item.

Alternate Brands

We found 1 similar part(s) made by other manufacturers.

Why Buy OEM & Genuine Replacement Auto Parts from AutohausAZ?

Auto parts at wholesale prices is what you will find at AutohausAZ. Have you been searching the web for auto parts for your vehicle? You have come to the right place! Here at Autohaus, we strive to offer low prices on quality replacement parts and providing first rate customer service.

What This Lucas-Girling Brake Caliper Fits?

Application information below is for reference only and should not be used to determine the exact vehicle fitment. Please use the "Make Sure It Fits" vehicle selection box above to determine the exact fitment and review any application notes. If you need any help determining if this part works with your vehicle, please don't hesitate to contact us.

VW
93-93 - Corrado SLC
Rear Right ~ To 3/93 w/o Bracket
90-92 - Corrado Base, SLC
Rear Right ~ w/o Bracket
90-92 - Golf GL, GTI 16-Valve, GTI 8-Valve
Rear Right ~ w/o Bracket
90-92 - Jetta Carat, GL, GLI 16-Valve
Rear Right ~ w/o Bracket
93-93 - Passat GL, GLX
Rear Right ~ Thru 9/92 VIN 31.P.080 000 w/o Bracket
90-92 - Passat CL, GL
Rear Right ~ w/o Bracket
86-88 - Quantum Syncro
Rear Right ~ w/o Bracket