Subaru Engine Oil Parts
Showing 6 out of 6 part(s) found in our catalog.
Brand
Keyword
Subcategory
Mon-Fri 8-4 MST/PST (Arizona Time)
The average price of a Subaru engine oil is between $6.79 and $50.99.
Subaru engine oil is the lubricant used to protect and enhance the performance of Subaru engines. It is specific to Subaru vehicles and is formulated to meet the unique needs of Subaru's boxer engine design.
Engine oil plays a critical role in protecting engine components, reducing friction, preventing wear and tear, and prolonging the life of the engine. It also helps regulate engine temperature, prevents corrosion and rust, and cleans internal engine parts.
Regularly changing the engine oil according to Subaru's recommended schedule ensures that the engine remains in good condition and performs at its best. Failure to use the right type of engine oil or neglecting to change it can lead to engine damage and reduced performance. Therefore, using the correct Subaru engine oil is essential for maintaining the health and longevity of your car's engine.
Signs You Need an Oil Change for your Subaru
- Oil light: Most vehicles have an oil warning light on their dashboard. If this light turns on, it means that the oil pressure is low, and it needs to be checked immediately.
- Engine noise: If you hear excessive engine noise, such as knocking or ticking, the oil might be dirty or low, which can cause the engine components to wear out faster.
- Exhaust smoke: When the oil in your Subaru is old or low, the engine may begin to produce smoke from the exhaust. This smoke is typically blue or grey and means that the engine oil needs replacement.
- Poor fuel economy: When the oil in your engine is not fresh, it causes the engine to work harder than it should, which can lead to a decrease in fuel efficiency.
- Dark or dirty oil: Take a look at the oil on the dipstick. If the oil is dark or dirty, then it's time for an oil change. Clean oil should look amber and transparent.
- Sluggish acceleration: If your Subaru is slow to accelerate, it could be due to old oil. As the oil breaks down over time, it becomes thicker, making it more difficult for the engine to move parts.
- Overheating: Old oil can lead to engine overheating. As the oil becomes thicker, it is less effective at dissipating heat, leading to engine overheating.
- Metal shavings in the oil: If you notice metal shavings in the oil on the dipstick or during an oil change, it's an indication of internal engine issues that need immediate attention.
- Regular maintenance: It's recommended to change your Subaru's oil every 5,000 miles or six months, whichever comes first. If you've gone beyond this mileage or time frame, it's time for an oil change.
In summary, if you experience any of the above symptoms with your Subaru, it's time for an oil change. Regular oil changes are crucial to maintaining the health of your engine and prolonging the lifespan of your vehicle.
How to Change Engine Oil In Your Subaru?
Here are the steps to change engine oil in a Subaru:
- Warm up the engine: Start the engine and let it run for about five minutes. This will help the oil flow more easily and drain faster during the oil change.
- Turn off the engine: Turn off the engine and let it cool down for a few minutes before proceeding.
- Locate the oil filter: The oil filter is usually located under the engine, near the oil pan. Identify the filter and place a drain pan beneath it.
- Remove the oil filter: Use an oil filter wrench to loosen and remove the oil filter. Some oil will spill out, so be sure to have the drain pan in place.
- Drain the old oil: Locate the oil drain plug on the bottom of the engine and remove it using a wrench. Let the old oil drain out completely.
- Replace the oil filter: Apply a thin layer of fresh oil to the rubber gasket on the new oil filter, then screw it in place by hand. Tighten with the oil filter wrench.
- Refill with fresh oil: Replace the oil drain plug and add the recommended amount of fresh oil to the engine. Use a funnel to avoid spills.
- Check the oil level: Use the dipstick to check the oil level and make sure it's within the recommended range.
- Start the engine: Start the engine and let it run for a few minutes while checking for leaks. Turn off the engine and recheck the oil level.
- Dispose of the old oil: Pour the old oil into a sealable container and take it to a recycling center or service station for disposal.
It's recommended to change the engine oil in a Subaru every 7,500 miles or every six months, whichever comes first.
Subaru Factory Engine Oil Specifications
Subaru is a Japanese automotive company famous for its all-wheel drivetrain and boxer engines. Engine oil specification standards for Subaru cars are set by the company to ensure that their engines are optimized for performance, longevity, and fuel economy.
The most common engine oil specification standard for Subaru is the API (American Petroleum Institute) rating. This rating is a widely-accepted industry standard that defines the quality and performance of engine oils. Subaru recommends using API-rated engine oils that meet or exceed the company's specifications.
Subaru also has its own in-house specification standards, which are higher than the API rating. These specifications are designed to meet the precise requirements of Subaru engines and ensure optimal performance. The most common in-house specification for Subaru is the Subaru Genuine Motor Oil (SGMO) standard. This specification is only met by Subaru-branded engine oils, which are available through authorized Subaru dealerships.
The SGMO specification ensures that engine oils provide superior performance, reduced engine wear, and improved fuel economy. It also includes specific additives to protect the engine from wear and tear caused by high-stress driving conditions, such as cold weather or extreme heat.
In addition to SGMO, Subaru has other in-house specification standards, including the Subaru High Performance Synthetic (SHPS) standard. This specification is specifically designed for high-performance Subaru models and provides enhanced protection and performance in extreme driving situations.
Subaru also recommends using engine oils that meet or exceed the ILSAC (International Lubricant Standardization and Approval Committee) specification. This specification is a global standard, developed by leading automotive manufacturers to ensure that engine oils provide optimum performance across a wide range of vehicles.
In summary, Subaru recommends using engine oils that meet the API rating, its own in-house specification standards, and the ILSAC specification. Using engine oils that meet these standards will ensure the best performance and longevity for your Subaru engine.
At AutohausAZ, we offer a wide range of high-quality Subaru engine oils that provide numerous benefits to our customers. Our selection includes products from reputable and well-known manufacturers, ensuring top-notch performance and protection for your vehicle.
Our team of experts is dedicated to providing excellent customer service by helping you find the right engine oil that meets your specific needs. We have a vast knowledge of our products and can help answer any questions you may have.
We also understand the importance of timely delivery, which is why we offer fast shipping options so that you can get the engine oil you need on time without any delay. Additionally, our prices are highly competitive, allowing you to save money while still getting the best quality products.
When you shop at AutohausAZ for your Subaru engine oil needs, you can feel confident that you are receiving superior products and exceptional service from a trusted source.
