Land Rover LR2 Camshaft Position Sensor Parts
Showing 1 out of 1 part(s) found in our catalog.
Brand
Keyword
Subcategory
Mon-Fri 8-4 MST/PST (Arizona Time)
The average price of a Land Rover LR2 camshaft position sensor is between $19.69 and $19.69.
What Are Common Symptoms Of A Faulty Land Rover LR2 Camshaft Position Sensor?
When a Land Rover LR2 camshaft position sensor begins to go, most people notice the engine isn’t running like it should. Sometimes you get a rough idle, or the SUV wants to stall at a stop. You may feel a dip in power when you try to accelerate, or the engine responds slower than normal. A misfire can happen here and there. Starting up can take longer, or the engine cranks but doesn’t fire up right away. The check engine light may pop on, sometimes stays, sometimes goes out again. Gas mileage can nosedive, too. If you’re seeing any mix of these, a faulty camshaft position sensor is one cause to consider.
How Can I Diagnose A Bad Land Rover LR2 Camshaft Position Sensor?
You can usually start with an OBD-II scan. A code like P0340 or P0341 points to problems with the Land Rover LR2 camshaft position sensor. Take a look at the wiring and connectors—sometimes something is cracked, loose, or dirty. Use a multimeter to check voltage at the sensor—readings that seem off can mean the sensor is failing or the circuit is broken somewhere. Oil leaks nearby aren’t rare; a leaky valve cover can make the sensor act up, so check for that. If all signs point to the sensor and other basics check out, swap it for a new one.
Where Is The Land Rover LR2 Camshaft Position Sensor Located?
The Land Rover LR2 camshaft position sensor sits up top on the engine, near where the timing chain or timing belt runs. It’s usually mounted to the cylinder head, often held by a small bolt, with a wiring harness plugged into it. Pull the engine cover, and you’ll see it close to the camshaft. The spot can shift a little by model year, but a good look at the top of the engine should find it without much trouble. Service manuals help if you need an exact diagram, but you won’t have to tear a bunch of parts out to get to it.
Can I Replace The Land Rover LR2 Camshaft Position Sensor Myself?
Yes, many do-it-yourselfers swap out a Land Rover LR2 camshaft position sensor at home. Park it on level ground, disconnect the negative battery cable, and take off the engine cover. Find the sensor and unplug the harness. Remove the sensor mounting bolt. Pull the old sensor, slide the new one in, bolt it down, reconnect the harness, and fit the engine cover back on. Reconnect your battery. Afterward, clear any check engine codes with a scanner if needed. As always, use a repair manual so you don’t miss any steps or torque numbers.
How Much Does It Cost To Replace A Land Rover LR2 Camshaft Position Sensor?
The part itself usually runs $50–$120, though it can swing up or down depending on brand and store. If you go to a shop, figure on another $100–$200 for labor. Altogether, most people spend somewhere in the $150–$300 zone for parts and labor. If you have tools and some time, you can save money by handling the fix at home and just paying for the sensor.
Where Can You Find Affordable Land Rover LR2 Camshaft Position Sensors?
AutohausAZ keeps it straightforward when it comes to Land Rover LR2 camshaft position sensors. Prices stay low—you don’t have to empty your wallet to fix what’s broken. Our parts hold up, which matters when you’re betting on a sensor to keep your engine dialed in. Fast shipping means you aren’t stuck without your ride for weeks. If you need to return something, it won’t turn into a headache. We answer questions fast and keep the shopping process smooth from start to finish. If you want a dependable part choice for your LR2, plus a fair deal, we’re here to help you wrap up the job and get back on the road.
