Land Rover LR3 Brake Pad Sensor Parts
Showing 9 out of 9 part(s) found in our catalog.
Brand
Keyword
Subcategory
Mon-Fri 8-4 MST/PST (Arizona Time)
Land Rover LR3 brake pad sensor typically cost between $10.28 and $20.29.
The Land Rover LR3 brake pad sensor is a component designed to monitor the condition of the brake pads in your vehicle. It is typically located on the brake pad itself and works by notifying the driver when the brake pads have worn down to a certain level. When the brake pads become thin, the sensor will send a signal to the vehicle's onboard computer system, which in turn triggers a warning light on the dashboard. This alert informs the driver that it is time to replace the brake pads to maintain proper braking performance and safety.
The Land Rover LR3 typically has two brake pad sensors, one for the front brakes and another for the rear brakes. These sensors are responsible for detecting the wear of the brake pads and alerting the driver when it is time to replace them.
Replacing Brake Pad Sensors On A Land Rover LR3
To replace the brake pad sensor on a Land Rover LR3, follow these steps:
- Park your vehicle on a flat surface and engage the parking brake for safety.
- Open the hood of your Land Rover and locate the brake fluid reservoir. It is typically located on the driver's side near the firewall.
- Remove the cap from the brake fluid reservoir to relieve any pressure buildup.
- Locate the wheel where you need to replace the brake pad sensor.
- Use a jack to raise the vehicle off the ground and secure it with jack stands.
- Remove the wheel nuts using a lug wrench and take off the wheel.
- Locate the brake caliper, which is mounted to the brake rotor, and remove the bolts or pins that hold it in place using an appropriate socket or wrench.
- Gently slide the caliper off the brake rotor and hang it using a wire or bungee cord, ensuring there is no tension on the brake line.
- Inspect the brake pads and sensor for wear and damage. If the sensor has worn down, it will need replacement.
- Disconnect the brake pad sensor from its electrical connector near the caliper. This may require gently prying it out or removing a retaining clip.
- Install the new brake pad sensor by plugging it into the electrical connector securely.
- Check the brake pad sensor's alignment and ensure it is positioned correctly against the brake pad.
- Reassemble the brake caliper by aligning it with the brake rotor and inserting the bolts or pins. Tighten them securely.
- Place the wheel back onto the wheel hub and hand-tighten the lug nuts.
- Lower the vehicle off the jack stands using a jack and remove the stands.
- Fully tighten the wheel nuts using a lug wrench in a star pattern.
- Repeat the process for any additional brake pad sensors that need replacement.
- Close the hood of your Land Rover and double-check that the brake fluid reservoir cap is secured properly.
- Start the vehicle and test the brakes by engaging them a few times to ensure proper operation.
- Take a short test drive to verify that the brake pad sensor replacement has been successful and there are no issues.
Remember to consult your Land Rover LR3's user manual for specific instructions and torque specifications, as they may vary based on the model year and equipment.
Top Land Rover LR3 Brake Pad Sensor Brands for Sale
Bowa:
Bowa is a well-known manufacturer of brake pad sensors for Land Rover LR3 vehicles. With a reputation for producing high-quality automotive components, Bowa brake pad sensors are designed to meet the exacting standards set by Land Rover. These sensors are manufactured using advanced technology and undergo rigorous testing to ensure reliability and durability. Bowa's commitment to excellence makes their brake pad sensors a popular choice among Land Rover enthusiasts who value OEM-quality parts.
Sadeca:
As another reputable manufacturer, Sadeca has established itself as a trusted supplier of brake pad sensors for Land Rover LR3 models. Sadeca's expertise in braking systems is reflected in their quality products. Their brake pad sensors are engineered to provide accurate readings and ensure optimal performance of the vehicle's braking system. Land Rover's endorsement of Sadeca as an approved supplier further emphasizes the reliability and compatibility of their brake pad sensors with LR3 models.
Febi:
Febi is renowned for manufacturing a wide range of automotive parts, including brake pad sensors for Land Rover LR3 vehicles. With a dedication to high standards, Febi produces top-quality components that meet or exceed original equipment specifications. Febi brake pad sensors are designed to function seamlessly with Land Rover LR3's braking system, providing accurate detection of pad wear. By choosing Febi, LR3 owners can have confidence in the performance and longevity of their brake pad sensors.
It is important to note that while Genuine branded parts are manufactured exclusively by the auto parts manufacturers chosen by the vehicle manufacturer, Bowa, Sadeca, and Febi, among others, are trusted suppliers whose products have gained the approval and support of Land Rover. While Genuine-branded parts may be more expensive, opting for these approved aftermarket options ensures that you are getting a high-quality product at a potentially more affordable price point.
Find Great Deals on Land Rover LR3 Brake Pad Sensor
When shopping at AutohausAZ for your Land Rover LR3 brake pad sensor, you'll find several advantages that make the experience truly exceptional. Firstly, a wide selection of high-quality brake pad sensors allows you to easily find the perfect fit for your vehicle. Whether you're looking for front or rear sensors, AutohausAZ offers a comprehensive range to meet your specific needs.
Additionally, their commitment to customer satisfaction ensures that you receive top-notch service throughout the purchasing process. From their user-friendly website to their knowledgeable customer support team, you can expect a seamless shopping experience. With their expertise, they can guide you in choosing the right sensor for your LR3, ensuring optimal performance and safety.
Furthermore, AutohausAZ's attention to detail extends to the quality of their products. The brake pad sensors available are sourced from reputable manufacturers, guaranteeing reliability and durability. This means you can trust that your Land Rover LR3 will be equipped with a sensor that can accurately detect brake pad wear, allowing you to address maintenance needs promptly.
Lastly, AutohausAZ's competitive pricing ensures that you get the best value for your money. While they prioritize offering high-quality products, their brake pad sensors are priced affordably, giving you peace of mind without breaking the bank. This affordability, coupled with the assurance of quality, makes AutohausAZ an excellent choice for all your Land Rover LR3 brake pad sensor needs.
In conclusion, AutohausAZ provides a range of advantages when shopping for a brake pad sensor for your Land Rover LR3. Their extensive selection, commitment to customer satisfaction, focus on product quality, and competitive pricing make them a trusted destination for all your automotive needs.
