Land Rover LR3 Tail Light Parts
Showing 1 out of 1 part(s) found in our catalog.
Brand
Keyword
Category
Select category below to view parts.
Mon-Fri 8-4 MST/PST (Arizona Time)
Land Rover LR3 tail light typically cost between $2.49 and $2.49.
How Do I Replace The Land Rover LR3 Tail Light Assembly?
Swapping out the Land Rover LR3 tail light assembly is something most owners can handle without much trouble. Start by popping open the rear hatch. Inside, you'll spot two screws holding the tail light in place—take these out. Next, gently work the assembly away from the body, watching out for any stubborn clips and making sure not to yank the wiring. Unplug the wiring harness, then set the old unit aside. To install the new Land Rover LR3 tail light, plug in the wiring, line up the assembly with the body, and tighten those screws back in. Before you close everything up, test the lights to make sure all the functions work. With a few basic tools, most folks can tackle this in less than half an hour.
What Are Common Causes Of Land Rover LR3 Tail Light Failure?
A few familiar issues can leave your Land Rover LR3 tail light out of commission. The most obvious culprit is a burnt-out bulb, but it’s not the only cause. Blown fuses, corroded bulb sockets, and damaged wiring all pop up from time to time. Sometimes water sneaks into the light housing, which can lead to short circuits or rust on the contacts. If new bulbs and fuses don’t solve the problem, take a closer look at the wiring and the socket itself. Cleaning up any corrosion with electrical contact cleaner often brings lights back to life. Catching these problems early usually means a quick and cheap fix.
Which Bulb Type Fits The Land Rover LR3 Tail Light?
Picking the right bulb is key for your Land Rover LR3 tail light. Most models use a 3157 bulb for brake and tail lights, while the indicator and reverse lights use different sizes. Checking your owner’s manual, or simply pulling the old bulbs to match them up, is the best way to be sure you’re installing the correct type. Stick to known brands to avoid premature failures or dim lights. It’s also worth checking for service bulletins or updates about bulb specs so you always stay up to code and safe on the road.
How Can Water Leaks In The Land Rover LR3 Tail Light Be Prevented?
Keeping the Land Rover LR3 tail light dry inside is important for long-term reliability. When you’re replacing bulbs or the whole assembly, always inspect the gasket; swap it out if it’s worn or missing. Make sure the light assembly fits snug against the body, as even tiny gaps can let water in. Some drivers use a light bead of automotive silicone along the edge for a bit of extra insurance. It’s smart to keep an eye on the lens for any condensation or obvious cracks, especially after wet weather, as this can tip you off to a problem before it gets worse.
Are Aftermarket Land Rover LR3 Tail Light Assemblies Reliable?
Aftermarket Land Rover LR3 tail light assemblies can be a good deal, but their quality isn’t always consistent. Some brands do a great job matching the factory part both in looks and fit, while bargain options may use flimsy materials or have poor sealing. It’s worth reading reviews and looking for parts that meet or exceed DOT safety standards. When in doubt, buying from a brand you recognize or sticking with original equipment is typically the safest route. And remember, even the best tail light won’t last long if it’s not installed properly.
Need A Land Rover LR3 Tail Light Fast And Hassle-Free?
AutohausAZ takes the hassle out of finding the right Land Rover LR3 tail light. With everyday low prices and speedy shipping, you’ll have the replacement part in your hands in no time. Not the right fit? No problem—returns are simple and straightforward. When your LR3 needs attention, you can count on us to help you get it sorted and back on the road without missing a beat.
