Land Rover LR3 Turn Signal Bulb Parts
Showing 4 out of 4 part(s) found in our catalog.
Brand
Keyword
Subcategory
Mon-Fri 8-4 MST/PST (Arizona Time)
Based on industry averages you can expect to pay between $0.69 and $2.49 for a Land Rover LR3 turn signal bulb.
What Size Bulb Does The Land Rover LR3 Turn Signal Use?
If you need to replace your Land Rover LR3 turn signal bulb, it’s important to get the right type. Most LR3 models call for a 7507 or PY21W bulb for both the front and the rear signals. Still, it’s smart to double-check your owner’s manual or take a look at the old bulb just to be sure—sometimes previous repairs might have swapped in something different. Grabbing the right size means everything works correctly and avoids frustration later. And if you’re switching to LEDs, be certain they fit the same socket and wattage needs. Bringing your old bulb with you to the store can make life a lot easier.
How Do I Replace The Turn Signal Bulb On A Land Rover LR3?
Swapping out a Land Rover LR3 turn signal bulb isn’t too tough, but access can be a little awkward. Start by opening the hood and look for the two screws holding the headlight assembly in place. Unscrew these, then gently slide the headlight forward—it usually pops out with a bit of wiggling. On the back, you’ll see the turn signal socket. Twist it out, pull the old bulb, and click in the new one. Repeat the process in the rear if you need to change a taillight bulb—just remove the screws, take out the taillight, and swap the bulb. Always test your signals before finishing up and putting everything back together.
Why Do My Turn Signals Flash Fast After Changing The Bulb?
If you notice your Land Rover LR3 turn signal bulb flashing quickly after a change, it’s usually the car’s way of telling you something’s not right. Most of the time this points to a bulb that’s burned out, not seated correctly, or a new LED bulb that doesn’t have a resistor. Land Rovers are set up to alert you with a “hyperflash” when there’s a problem in the lighting circuit. Double-check that all bulbs are in working order and seated tightly. If you went with LEDs, a load resistor usually solves the fast-blinking.
Are There Better Bulb Options For The Land Rover LR3 Turn Signals?
Plenty of LR3 owners consider upgrading the Land Rover LR3 turn signal bulb to get more brightness or durability. LED bulbs are popular—they shine brighter, react quickly, and usually last a lot longer. Halogen bulbs labeled “long life” are a strong choice too if you want to stick with traditional bulbs. Just be sure to pick bulbs with an amber color for safety and legality. The factory option is tried and true, but an upgrade to LED delivers a sharper look and a bit more peace of mind on the road.
What Should I Do If The New Turn Signal Bulb Still Doesn’t Work?
If your new Land Rover LR3 turn signal bulb isn’t lighting up, check a few things before giving up. Inspect the bulb socket for rust or signs of moisture—anything crusty or greenish is a giveaway. Make sure the new bulb is pushed in fully, and try swapping the old bulb back just to confirm it’s not the replacement that’s faulty. It’s also worth checking the fuse for the turn signals; a blown fuse is a common culprit. If everything checks out and you’re still having trouble, the wiring or relay could be at fault, and that’s when a mechanic might be your best bet.
Looking For A Land Rover LR3 Turn Signal Bulb?
At AutohausAZ, getting your Land Rover LR3 turn signal bulb is quick and straightforward. You’ll find good deals every day, and orders ship out fast so you’re not stuck waiting. If you run into any trouble, returns are painless and customer service is easy to reach. Trust us to help keep your LR3 running smoothly, with the right parts whenever you need them.
