Land Rover Range Rover Evoque Brake Pad Sensor Parts
Showing 20 out of 53 part(s) found in our catalog.
Brand
Keyword
Subcategory
Mon-Fri 8-4 MST/PST (Arizona Time)
Based on industry averages you can expect to pay between $12.39 and $28.99 for a Land Rover Range Rover Evoque brake pad sensor.
The Land Rover Range Rover Evoque brake pad sensor is a component that monitors the thickness of the brake pads. It is designed to alert the driver when the brake pads are wearing thin and may need to be replaced. The sensor sends a signal to the vehicle's onboard computer system, which then triggers a warning light on the instrument panel, indicating that it is time to have the brake pads inspected or replaced. This sensor helps ensure the safety and optimal performance of the braking system by providing timely reminders for maintenance.
The Land Rover Range Rover Evoque typically has two brake pad wear sensors, one for the front brakes and one for the rear brakes.
Replacing Brake Pad Sensors On A Land Rover Range Rover Evoque
- Gather necessary tools and materials: You will need a new brake pad sensor specific to your Land Rover Range Rover Evoque model, a socket wrench with the appropriate size socket, a jack and jack stands, and a pair of pliers.
- Prepare your vehicle: Make sure your vehicle is parked on a flat surface and the engine is turned off. Engage the parking brake for added safety.
- Lift the vehicle: Locate the jacking points on your Range Rover Evoque. These are typically marked underneath the vehicle. Use the jack to lift the front or rear of the vehicle, depending on which brake pad sensor you are replacing. Place jack stands under the vehicle to support it securely.
- Remove the wheel: Using the socket wrench, remove the lug nuts holding the wheel in place. Carefully slide the wheel off the wheel hub and set it aside.
- Locate the brake pad sensor: Look for the brake pad sensor attached to the brake caliper. It should be a small, thin wire connected to an electrical connector.
- Disconnect the electrical connector: Use a pair of pliers to gently squeeze and release the plastic tabs on the electrical connector. This will allow you to disconnect the brake pad sensor from the wiring harness.
- Remove the old brake pad sensor: Once the electrical connector is detached, you can remove the old brake pad sensor. It may be secured by a retaining clip or secured directly to the brake caliper. Carefully disconnect or unclip it, ensuring not to damage any surrounding components.
- Install the new brake pad sensor: Take the new brake pad sensor and align it with the appropriate location on the brake caliper. If applicable, secure it with the retaining clip or attach it firmly to the brake caliper.
- Reconnect the electrical connector: Plug the electrical connector from the new brake pad sensor into the wiring harness. Ensure it is securely connected and the plastic tabs lock it in place.
- Reinstall the wheel: Slide the wheel back onto the wheel hub and hand-tighten the lug nuts. Use the socket wrench to tighten the lug nuts further, following a star pattern for even tightening. Ensure the lug nuts are tightened to the manufacturer's recommended torque specifications.
- Lower the vehicle: Carefully remove the jack stands and lower the vehicle using the jack until it rests securely on the ground.
- Repeat the process for other brake pad sensors (if necessary): If you need to replace the brake pad sensor on the other wheel, repeat steps 3 to 11 on the corresponding side of the vehicle.
- Test the brake pad sensor: Start your vehicle and test the brake pad sensor by pressing the brake pedal. Check if the sensor is functioning correctly by ensuring there are no warning lights or messages related to the brake system on your dashboard.
Please note that this is a general guide, and it's always recommended to consult your vehicle's specific owner's manual for detailed instructions and safety precautions before attempting any maintenance or repairs.
Top Land Rover Range Rover Evoque Brake Pad Sensor Brands for Sale
Eurospare is a well-known manufacturer of brake pad sensors for Land Rover Range Rover Evoque vehicles. Their brake pad sensors are designed to meet the high-quality standards set by Land Rover, ensuring optimal performance and reliability. Eurospare focuses on producing original equipment quality parts, which means their brake pad sensors are made to the same specifications as the ones installed on new vehicles at the factory. While Eurospare products may not carry the Land Rover genuine branding, they are still considered a reputable choice for replacement brake pad sensors.
Bowa is another recognized manufacturer of brake pad sensors for Land Rover Range Rover Evoque models. They strive to produce parts that match or exceed the original equipment quality set by Land Rover. Bowa's brake pad sensors are designed to provide accurate and reliable readings, alerting drivers when it's time to replace their brake pads. Although Bowa may not be a brand directly associated with Land Rover, their commitment to quality ensures that their brake pad sensors are a suitable alternative for genuine Land Rover parts.
Febi is a trusted manufacturer of various automotive components, including brake pad sensors. While not specifically associated with Land Rover, Febi produces high-quality aftermarket parts that often meet or exceed the standards set by original equipment manufacturers. Their brake pad sensors are designed to provide accurate wear detection and durability. Febi's reputation for producing reliable and cost-effective replacement parts makes them a popular choice among vehicle owners looking for alternatives to genuine branded parts.
It is essential to recognize that while genuine branded parts manufactured directly by Land Rover are generally considered the highest quality option, they also tend to be the most expensive. However, reputable manufacturers like Eurospare, Bowa, and Febi offer reliable alternatives that can perform effectively and provide excellent value for money. Ultimately, the decision regarding which brand to choose depends on individual preferences, budget constraints, and the level of trust one has in these aftermarket manufacturers.
Find Great Deals on Land Rover Range Rover Evoque Brake Pad Sensor
When shopping at AutohausAZ, one can find several advantages when purchasing a brake pad sensor for the Land Rover Range Rover Evoque. Firstly, they offer a wide selection of high-quality sensors specifically designed for this luxury vehicle. This ensures that customers can easily find the perfect fit for their Range Rover Evoque, promoting optimal performance and safety on the road.
Additionally, AutohausAZ provides reliable and durable brake pad sensors that meet or exceed OEM standards. This means that customers can have peace of mind knowing that they are getting a product that is built to last and perform at the highest level. With these sensors, drivers can maintain the braking system efficiency of their Range Rover Evoque, ensuring a smooth and responsive driving experience.
Furthermore, shopping at AutohausAZ allows customers to conveniently browse and purchase brake pad sensors from the comfort of their own home. Their user-friendly website interface makes it effortless to navigate through the available options and make a purchase with just a few clicks. This eliminates the need to visit multiple stores or call around in search of the right sensor, saving valuable time and effort.
Lastly, AutohausAZ offers competitive pricing for their Land Rover Range Rover Evoque brake pad sensors, providing customers with a cost-effective solution without compromising on quality. By offering these sensors at affordable prices, AutohausAZ allows Range Rover Evoque owners to maintain their vehicle's braking system without breaking the bank.
In conclusion, when shopping at AutohausAZ for a brake pad sensor for the Land Rover Range Rover Evoque, one can benefit from a wide selection, high-quality products, convenient online shopping, and competitive pricing. These advantages make AutohausAZ a reliable choice for Range Rover Evoque owners looking to ensure the safety and performance of their braking system.
