Mercedes 380SE Engine Oil Parts
Showing 20 out of 46 part(s) found in our catalog.
Brand
Keyword
Subcategory
Mon-Fri 8-4 MST/PST (Arizona Time)
The average cost of a Mercedes 380SE engine oil is between $10.69 and $75.16.
The Mercedes 380SE, being a vehicle from the early 1980s, typically demands engine oil of certain viscosity and quality levels to ensure not just good performance but also longevity. This engine oil serves the purpose of lubricating the moving parts, minimizing friction, and preventing wear and tear. It also assists in cooling down the engine by dissipating heat and in cleaning the internal parts by carrying away contaminants. The correct application of engine oil is necessary to maintain efficiency, reduce emissions, and ensure dependable performance in varied driving conditions. Periodic oil change with the correct type of oil assists in safeguarding the vehicle's performance and ensuring its durability.
Types of Engine Oil for Mercedes 380SE
- Castrol Edge: This is a synthetic oil that offers excellent protection and performance, designed to unlock maximum engine power and endurance in all driving conditions.
- Liqui Moly Leichtlauf High Tech is renowned for its high-tech formulation, which enhances engine cleanliness and provides enhanced lubrication that reduces wear and extends the engine's life.
- Mobil 1, being a high-performance oil, guarantees excellent engine protection under the most extreme temperatures and conditions, with smooth running and long-lasting durability.
- Liqui Moly Molygen: This oil is developed with special friction modifiers that are designed to minimize engine wear, improve fuel efficiency, and ensure long-term engine health.
Mercedes 380SE Oil Capacity
- 1980-1981: Approximately 7.9 quarts
- 1982-1985: approximately 7.9 quarts
These are approximate values, and you need to refer to the owner's manual or a mechanic professional to obtain accurate values specific to your vehicle.
Changing the Engine Oil in Your Mercedes 380SE
- Gather materials and tools that you will require, including a new oil filter, the correct type and quantity of engine oil, a wrench set, an oil catch pan, and a funnel.
- Park the car on a level surface and ensure the engine is cold.
- Open the bonnet and unscrew the oil filler cap to allow air entry and drainage.
- Lift the vehicle with a jack and safely hold it in place with jack stands.
- Place the oil catch pan beneath the oil pan drain plug.
- With the correct wrench, loosen and remove the drain plug and let the old oil completely drain into the catch pan.
- Replace and tighten the drain plug securely after draining.
- Locate and remove the old oil filter using an oil filter wrench.
- Rub a little fresh oil on the rubber gasket of the new oil filter.
- Hand tighten the new oil filter in a clockwise direction until snug, but do not over tighten.
- Pour in the quantity of new engine oil indicated using a funnel into the oil filler neck.
- Put the oil filler cap back on and start the engine, letting it run for a few minutes before checking for leaks.
- Turn off the engine and check the oil level with the dipstick, adding oil if necessary.
- Bring the filter and used oil to a recycling center that is licensed.
Here at AutohausAZ, we take pride in making your Mercedes 380SE engine oil shopping experience as easy and affordable as possible. With our prices discounted heavily, you can be sure that you are getting the best deal without sacrificing quality. Furthermore, our quick shipping guarantees that your engine oil arrives in good time to avoid your vehicle being out of commission for too long. Furthermore, should you ever need to return something, our simple process ensures that it's hassle-free. Shopping with us ensures your Mercedes 380SE continues to run smoothly, without emptying your wallet.

