Volvo V50 ABS Wheel Speed Sensor Parts
Showing 4 out of 4 part(s) found in our catalog.
Brand
Keyword
Subcategory
Mon-Fri 8-4 MST/PST (Arizona Time)
The average cost of a Volvo V50 abs wheel speed sensor is between $14.19 and $34.99.
The Volvo V50 ABS wheel speed sensor is a sensor located on each wheel of the vehicle that measures the rotational speed of the wheels. It works in conjunction with the anti-lock braking system (ABS) to monitor the speed of each wheel and detect any differences or inconsistencies. By constantly monitoring the wheel speed, the ABS wheel speed sensor helps prevent the wheels from locking up during braking, ensuring maximum control and stability while driving. This sensor plays a crucial role in allowing the ABS system to function properly and maintain optimal braking performance.
The Volvo V50 typically has four ABS wheel speed sensors, one for each wheel.
The lifespan of a Volvo V50 ABS wheel speed sensor can vary depending on various factors such as driving conditions, maintenance, and quality of the sensor. On average, these sensors can last anywhere between 50,000 to 100,000 miles (80,000 to 160,000 kilometers). However, it is important to note that sensors can fail prematurely or last longer than expected. Regular inspection and maintenance of the ABS system can help identify any issues and ensure optimal functionality.
Replacing ABS Wheel Speed Sensors On A Volvo V50
- Gather the necessary tools and equipment, including a jack, jack stands, wrenches, ratchet set, pliers, and a new ABS wheel speed sensor specific to your Volvo V50 model.
- Park your vehicle on a level surface and engage the parking brake for safety.
- Loosen the lug nuts on the wheel where you need to replace the ABS wheel speed sensor.
- Use a floor jack to lift the vehicle off the ground, ensuring that you place the jack in the recommended jacking points mentioned in your vehicle's manual.
- Secure the vehicle by placing jack stands under the chassis or recommended locations for additional support.
- Remove the lug nuts and pull the wheel off, exposing the brake assembly.
- Locate the ABS wheel speed sensor on the knuckle area behind the brake rotor. It is usually held in place by one or two bolts.
- Use the appropriate wrench or ratchet set to remove the mounting bolt(s) securing the ABS wheel speed sensor. Be careful not to damage the sensor while removing it.
- Disconnect the electrical connector attached to the ABS wheel speed sensor. This may require using pliers to release any locking tabs or pressing on release buttons.
- Once the old sensor is removed, compare it with the new ABS wheel speed sensor to ensure they match.
- Connect the electrical connector to the new ABS wheel speed sensor.
- Position the new sensor in the same location where the old one was mounted and secure it in place by tightening the bolt(s) according to the manufacturer's specifications. Avoid overtightening.
- Reinstall the wheel onto the vehicle and hand-tighten the lug nuts.
- Lower the vehicle slowly using the jack until all four wheels are touching the ground.
- Use a torque wrench to tighten the lug nuts to the recommended specifications as indicated in your vehicle's manual.
- Double-check that all connections are secure and that the new ABS wheel speed sensor is properly installed.
- Test the ABS system by starting the vehicle and driving it at a low speed to ensure proper functionality.
It is recommended to consult your Volvo V50 owner's manual or a professional mechanic for detailed instructions specific to your vehicle model and year.
Top Volvo V50 ABS Wheel Speed Sensor Brands for Sale
ATE:
ATE is a renowned manufacturer of automotive braking systems and components, including ABS wheel speed sensors. The company has a long-standing reputation for producing high-quality products that meet strict industry standards. ATE ABS wheel speed sensors are known for their reliable performance and accuracy in detecting wheel speed variations. These sensors are designed to provide precise data to the vehicle's ABS system, enabling it to effectively control the braking process. ATE ABS wheel speed sensors are often considered a reliable choice, offering durability and consistent functionality.
Genuine Volvo:
As the name suggests, Genuine Volvo parts are manufactured exclusively by the auto parts manufacturers chosen by Volvo themselves. This ensures that these parts meet the strict quality standards set by the vehicle manufacturer. Genuine Volvo ABS wheel speed sensors are made to be direct replacements for the original equipment installed in Volvo vehicles. They are built to the same specifications as the factory-installed sensors, guaranteeing compatibility and optimal performance. While Genuine Volvo parts tend to be more expensive due to their branding, they are known for their exceptional quality and reliability.
URO Parts:
URO Parts is a supplier of aftermarket automotive components, including ABS wheel speed sensors. While not directly affiliated with Volvo, URO Parts aims to provide quality alternatives to original equipment parts. URO Parts ABS wheel speed sensors are designed to fit specific Volvo models and are manufactured with attention to detail and functionality. These sensors are generally more affordable compared to Genuine Volvo parts without compromising on overall quality. However, it's important to note that some users may have varying experiences with aftermarket parts, and it's always recommended to ensure compatibility and quality assurance before purchasing.
Overall, when considering ABS wheel speed sensors for your Volvo V50, each manufacturer offers distinct advantages. ATE and Genuine Volvo provide a higher level of assurance in terms of quality and compatibility, with Genuine Volvo being the OEM choice. URO Parts, on the other hand, offers a more affordable option without compromising on functionality. Ultimately, choosing the right manufacturer depends on your specific needs, priorities, and budget.
Find Great Deals on Volvo V50 ABS Wheel Speed Sensor
One of the advantages of shopping for a Volvo V50 ABS wheel speed sensor at AutohausAZ is the convenience it offers. When searching for this particular part, customers can easily browse through our wide selection of high-quality sensors from reputable brands. With our user-friendly website, finding the right ABS wheel speed sensor for your Volvo V50 becomes a hassle-free experience.
Moreover, AutohausAZ ensures that customers receive exceptional service throughout their shopping journey. Our team of knowledgeable professionals is readily available to assist with any inquiries or concerns regarding the ABS wheel speed sensor. By providing accurate and detailed product information, we strive to empower our customers to make informed purchasing decisions.
In addition to our commitment to quality and excellent customer service, AutohausAZ values competitive pricing. Customers can trust that they are receiving a fair price for the Volvo V50 ABS wheel speed sensor without compromising on its performance or durability. This makes AutohausAZ a go-to destination for those seeking not only convenience but also affordability.
Furthermore, AutohausAZ believes in building long-term relationships with our customers. We understand that vehicle maintenance is an ongoing process, which is why we offer a wide range of automotive parts and accessories beyond ABS wheel speed sensors. From routine maintenance items to more complex components, our extensive inventory allows customers to find everything they need conveniently under one roof.
In conclusion, shopping at AutohausAZ for a Volvo V50 ABS wheel speed sensor provides numerous advantages. From the convenience of our user-friendly website to the exceptional customer service offered by our knowledgeable staff, customers can count on a seamless shopping experience. Additionally, our commitment to competitive pricing ensures that customers receive the best value for their money. With AutohausAZ, finding the right ABS wheel speed sensor for your Volvo V50 has never been easier.
