BMW 740I Tail Light Parts
Showing 20 out of 21 part(s) found in our catalog.
Brand
Keyword
Category
Select category below to view parts.
Mon-Fri 8-4 MST/PST (Arizona Time)
Based on industry averages you can expect to pay between $0.89 and $397.99 for a BMW 740I tail light.
Why Does My BMW 740I Tail Light Keep Burning Out?
If your BMW 740I tail light keeps burning out, you're not alone—it's a pretty common complaint. The usual suspects are moisture sneaking into the tail light assembly, wiring issues, or just getting unlucky with poor-quality bulbs. Even tiny cracks in the housing or a worn-out gasket can let in enough water or condensation to corrode the contacts or the bulb’s base. Sometimes, road vibrations can shake the bulb enough to damage the filament or work it loose. The best plan is to give the housing a careful once-over, swap out any bad gaskets, and always install new bulbs with a snug, clean fit. A few simple tweaks can often solve the burnout problem for good.
How Do I Replace a BMW 740I Tail Light Bulb?
When it comes time to swap out a BMW 740I tail light bulb, the process usually starts by opening the trunk and gently pulling back the liner to get to the tail light assembly. You'll need to disconnect the wiring harness—sometimes by pressing a tab, sometimes by loosening a small screw. From there, remove any screws or clips holding the assembly, then twist out the bulb socket from the back. Pop in a new bulb (making sure it's the correct type), and reassemble everything. The job can be a little fiddly, especially on older models where things might be stubborn, but taking your time goes a long way.
What Causes Condensation Inside the BMW 740I Tail Light?
Finding condensation inside the BMW 740I tail light is a headache for many. The most likely cause is a crack in the lens or a failing seal around the assembly that lets humid air or water in. That moisture can fog up the inside and sometimes even mess with the electronics, leading to warning lights on the dash or flickering lights. It’s worth checking the tail light for any obvious damage or gaps, swapping out the gasket if it’s cracked, and resealing the edges with a weatherproof sealant. Make sure everything’s dry before buttoning it up—otherwise, you’ll be back at square one.
Why Is the BMW 740I Tail Light Warning Light On?
If your BMW is throwing a tail light warning even though everything seems to work, the car’s system is probably picking up on a subtle issue. It checks the resistance of each bulb, so a nearly burnt-out bulb, a bit of corrosion on the contacts, or even a cheap aftermarket bulb can cause it to throw an error. Bad grounding, bent pins, or a tired tail light module can do the same. Start by checking every bulb and connector for tightness and corrosion. Sometimes, just cleaning things up or swapping out an older bulb is all it takes to clear the warning.
Can I Upgrade My BMW 740I Tail Light to LED?
Upgrading your BMW 740I tail light to LED is definitely possible, and a lot of folks do it for the brighter light and lower chance of burnout. You’ll either need bulbs that fit the factory socket or, for a full upgrade, a new tail light assembly made for your model. LEDs draw a lot less power, so a resistor kit is usually necessary to keep your car’s computer from throwing a “bulb out” warning. Stick with brand-name parts made to work with your BMW to avoid headaches later—and always follow the instructions for a smooth install.
Looking for a BMW 740I Tail Light at a Discounted Price?
At AutohausAZ, we make it simple to find the right BMW 740I tail light without the sticker shock. You’ll find deep discounts and quick shipping, so you’re not waiting around with one tail light working. Hassle-free returns mean you can shop confidently, and you’ll get back on the road with less fuss and more savings.
