Mercedes 220S Turn Signal Bulb Parts
Showing 3 out of 3 part(s) found in our catalog.
Brand
Keyword
Subcategory
Mon-Fri 8-4 MST/PST (Arizona Time)
The average price of a Mercedes 220S turn signal bulb is between $1.49 and $2.19.
What Type Of Bulb Does The Mercedes 220S Turn Signal Use?
The Mercedes 220S turn signal bulb is typically a single-filament bayonet-base bulb—often labeled as 1156 or BA15S in the U.S. markets. It's smart to pull the old bulb and check for markings, since there can be slight differences depending on the model year or previous repairs. You’ll also find LED versions that fit the original socket, but make sure your system is compatible or can handle the switch—sometimes a resistor or flasher relay upgrade is needed. Always double-check your owner’s manual or wiring diagram for details tied to your specific car.
How Do I Replace The Mercedes 220S Turn Signal Bulb?
Changing the Mercedes 220S turn signal bulb is a straightforward job. Start by shutting off the car and making sure nothing is powered on. The lens over the bulb is usually held on with screws or clips—remove those and lift off the cover. Gently twist and pull the old bulb from its socket. Seat the new bulb, making sure it clicks into place. Reattach the lens, tighten any fasteners, and check that the turn signal works. If you see any corrosion or debris, wipe the contacts clean before installing the new bulb.
Why Do My Turn Signals Flash Too Fast After Replacing A Bulb?
When a Mercedes 220S turn signal bulb is replaced and the signal starts flashing too quickly, it’s usually due to a change in resistance in the circuit. This often happens with LED replacement bulbs since they use less power than standard bulbs, making the car think a bulb is burned out. To fix this, you’ll likely need a load resistor—or swap in a flasher relay made for LED bulbs. It’s also worth double-checking that all bulbs in the circuit are working as they should.
What Should I Do If My Turn Signal Bulb Is Not Working Even After Replacement?
If the new Mercedes 220S turn signal bulb isn’t lighting up, start by looking at the fuse for the turn signal circuit. If the fuse is good, check the bulb socket for dirt or corrosion, and make sure the bulb is pressed in all the way. Inspect the wiring for any obvious damage—classic cars can have worn or chewed wiring. If nothing stands out, the switch itself or the relay could be the culprit, especially if the other parts of the circuit seem fine.
Are There Upgrades Available For Mercedes 220S Turn Signal Bulbs?
Upgrading your Mercedes 220S turn signal bulb is a popular move among owners. LEDs are the most common upgrade, offering brighter light and a much longer lifespan than the original-style bulbs. When switching to LEDs, you’ll likely need to add a resistor or swap to a compatible flasher relay so you don’t get hyper-flashing. You can also find halogen upgrades that pop right in without needing electrical changes. No matter what you choose, make sure the bulbs fit well and don’t cause too much heat or discoloration in your lenses.
Why Buy Your Mercedes 220S Turn Signal Bulb From Us?
When you order your Mercedes 220S turn signal bulb from us, you get reliable parts at prices that won’t break the bank. We ship quickly, so you can get your car back on the road sooner, and if anything isn’t right, our return process is straightforward. With AutohausAZ, it’s easier to get the right part without any hassle.
