Mercedes 230S Tail Light Parts
Showing 1 out of 1 part(s) found in our catalog.
Brand
Keyword
Category
Select category below to view parts.
Mon-Fri 8-4 MST/PST (Arizona Time)
Mercedes 230S tail light typically cost between $1.49 and $1.49.
How Do I Replace The Bulb In My Mercedes 230S Tail Light?
Changing the bulb in your Mercedes 230S tail light isn’t too complicated. Start by popping the trunk so you have room to work. Look for the panel just inside, right behind the tail light. Undo any screws or clips holding it in place, then gently pull the panel away to reveal the back of the assembly. Find the bulb socket, give it a twist to the left, and pull it out. Swap out the old bulb for a new one, making sure it’s seated all the way. Reassemble everything, then switch the lights on to make sure you’re good to go. If you have gloves handy, wear them while handling the new bulb to avoid getting fingerprints on it.
Why Is My Mercedes 230S Tail Light Not Working?
If the Mercedes 230S tail light isn’t coming on, a burned-out bulb is often the easiest fix—start there. If a new bulb doesn’t help, have a look at the fuses related to the rear lights. Sometimes, corrosion or dirt in the socket will prevent a good connection, so clean that out if you see any buildup. Older wiring can crack or lose contact over time, which is also something to watch for. Usually, working through the possible trouble spots one by one will uncover the culprit.
What Type Of Bulb Does The Mercedes 230S Tail Light Use?
Most Mercedes 230S tail light models use fairly common incandescent bulbs you can pick up at auto parts shops. The usual suspects are 1157 or 1073, but it’s always smart to double-check in your owner’s manual or pull the old one out to match it up before you buy. If you’d like to try LED bulbs for a bit more brightness, they’re out there, but you might need additional resistors to keep everything working smoothly and avoid dashboard warning messages.
How Do I Remove The Mercedes 230S Tail Light Assembly?
To take out the Mercedes 230S tail light assembly, open your trunk and track down the screws or nuts holding the unit in place (usually behind a bit of trunk trim). After you’ve removed whatever’s in the way, loosen the fasteners with a socket or screwdriver. The tail light assembly should slide out gently—just don’t yank or you might damage the gasket or wiring. Unplug the connector before fully removing the light. Reinstalling is just a matter of lining everything up, making sure the seal is in place, and tightening things back down.
Where Can I Find Replacement Lenses Or Parts For My Mercedes 230S Tail Light?
For parts like Mercedes 230S tail light lenses or assemblies, the best places to check are specialty vintage Mercedes parts dealers, classic European auto shops, and online marketplaces for classic cars. Some people get lucky at swap meets or through connections in clubs for vintage Mercedes enthusiasts. Reproduction parts are out there if original ones aren’t available. Before buying online, double-check the part numbers and photos to make sure you’re getting the right fit. A little patience usually pays off when tracking down quality parts for these classics.
Looking For A Mercedes 230S Tail Light?
AutohausAZ makes it a breeze to find the right Mercedes 230S tail light. We offer discounts that keep your project affordable, and our shipping is fast so you’re not left waiting. If you need to return something, we keep it hassle-free. You get reliable parts, a fair price, and a smooth experience every step of the way.
