Mercedes 230SL Coolant Parts
Showing 6 out of 6 part(s) found in our catalog.
Brand
Keyword
Category
Select category below to view parts.
Mon-Fri 8-4 MST/PST (Arizona Time)
Based on industry averages you can expect to pay between $9.19 and $21.79 for a Mercedes 230SL coolant.
The Mercedes 230SL coolant takes an ethylene glycol-based coolant, which is necessary for controlling the engine's temperature and safeguarding it against damage from heat. In addition, the coolant safeguards against freezing and corrosion within the cooling system. It is necessary to ensure proper level and mixture of the coolant to achieve optimum engine performance and life because it keeps the engine safe from potential damage due to excessive temperatures or rust. Periodic checking and replacement of the coolant according to the manufacturer's instructions is a vital aspect of maintaining your automobile.
Type of Coolant for Mercedes 230SL
The Mercedes 230SL coolant, which is among the W113 series of cars manufactured from 1963 to 1967, commonly uses an ethylene glycol-based coolant. The particular coolant has the capability to offer efficient heat transfer along with corrosion and freezing protection under different climatic conditions. Utilizing a coolant that is compliant with the standards outlined in the owner's manual is paramount, or else one could try consulting an expert on current options that will ensure the cooling system works at its best and longest. Maintenance is essential, with periodic checks of the coolant included, to make sure the engine runs efficiently.
Mercedes 230SL Coolant Capacity by Year
- The Mercedes 230SL, which was produced between 1963 and 1967, has a 2.3-liter inline-six engine.
- The coolant capacity of this great car is pretty consistent throughout its model years and engine types.
- For the most part, the coolant capacity will be around 10.5 quarts, or 2.6 gallons.
- As always, though, it is always best to check the owner's manual or speak with a professional mechanic to give the most accurate information for your car's year and any possible variances.
How to Add Coolant to Your Mercedes 230SL
- Ensure the car is on a level surface and the engine is completely cold before starting.
- Open the bonnet by operating the hood release lever inside the vehicle, and then releasing the secondary catch at the front of the bonnet.
- Locate the coolant reservoir tank under the hood. This is typically a clear plastic tank with a cover that says "coolant" or "engine coolant."
- Remove the cap from the coolant reservoir by turning it counterclockwise carefully.
- Check the present level of coolant against the minimum and maximum markings on the side of the reservoir.
- If the coolant level is below the minimum, blend a 50/50 mixture of 50% distilled water and 50% Mercedes-Approved coolant.
- Slowly pour the mixture of coolant into the reservoir up to the maximum mark.
- Put the cap back on the coolant reservoir and tighten it securely.
- Shut the hood and start the engine and let it run for a couple of minutes to circulate the new coolant.
- Inspect the reservoir for leaks, and verify that the temperature gauge on the dashboard indicates a reading in the correct range.
- Dispose of any leftover coolant mixture in accordance with local regulations.
At AutohausAZ, we are proud to provide you with a trouble-free shopping experience for all your Mercedes 230SL coolant needs. Our much lower prices provide you with the best value without compromising on quality. With our prompt shipping, your coolant will arrive at your doorstep in no time, so your baby can continue to run smoothly. Furthermore, in the unlikely event that you do need to return something, our simple return procedure saves you from any hassle. Shopping with us is all about convenience and value, so you can concentrate on having a great trip.
