Mercedes 250S Coolant Parts
Showing 6 out of 6 part(s) found in our catalog.
Brand
Keyword
Category
Select category below to view parts.
Mon-Fri 8-4 MST/PST (Arizona Time)
The average cost of a Mercedes 250S coolant is between $5.19 and $21.79.
The Mercedes 250S coolant relies on a special coolant, usually a combination of water and antifreeze, to cool the engine and guard it against overheating. The coolant is an essential item since it keeps the engine at its ideal temperature, shields the cooling system from corrosion, and provides efficient heat transfer. Choosing the correct type of coolant is vital for the vehicle's engine life and performance, as it keeps the engine safe from damage and expensive repairs. The coolant level and condition should be checked regularly to enable the vehicle to operate reliably.
Type of Coolant for Mercedes 250S
The Mercedes 250S usually needs a special type of coolant, one that's compatible with its engine materials. A high-quality, ethylene glycol-type antifreeze, with corrosion inhibitors that conform to the specifications set by Mercedes-Benz, is recommended. Check the owner's manual or refer to an authorized Mercedes-Benz service facility to be sure you are using the correct coolant for optimal performance and protection.
Mercedes 250S Coolant Capacity by Year
- 1965-1967, 2.5L Inline-6 Engine: Approximately 18 quarts
- 1968-1972, 2.5L Inline-6 Engine: Approximately 18 quarts
How to Add Coolant to Your Mercedes 250S
- Ensure the car is parked on a flat surface, the engine is off, and it is cool to the touch.
- Pull the hood release lever located inside the vehicle, and then open the hood by lifting the hood latch.
- Locate the coolant reservoir, usually a transparent plastic tank, marked with a cap that reads "coolant" or displays a temperature warning symbol.
- Compare the present coolant level with the marks on the reservoir side.
- If the level drops below the minimum line, carefully remove the cap, being careful not to apply any pressure.
- Mix the correct coolant and distilled water if you are not using pre-mixed coolant. Mercedes cars usually need a special kind of coolant, so check the owner's manual for instructions.
- Slowly fill the reservoir with the mixture of coolant, allowing it to bubble up to the top fill line.
- Put the cap back on the coolant reservoir tightly.
- Start the engine and let it run for a couple of minutes so that the coolant circulates.
- Check for leaks around the reservoir and underneath the vehicle.
- Turn off the engine and recheck the coolant level, topping it up if necessary after the engine has cooled.
Purchasing coolant for your Mercedes 250S coolant from AutohausAZ is a breeze. We're proud to provide heavily discounted parts while still maintaining the highest quality, so you know you're getting the best possible deal. With our quick shipping, your coolant will be in your hands in no time, and your Mercedes will continue running like new. And if something isn't quite right, our simple returns policy makes it easy to correct any issues. Select AutohausAZ for your Mercedes 250S coolant requirements and see the convenience and savings for yourself.
