Mercedes 280S Tail Light Bulb Parts
Showing 16 out of 16 part(s) found in our catalog.
Brand
Keyword
Subcategory
Mon-Fri 8-4 MST/PST (Arizona Time)
Mercedes 280S tail light bulb typically cost between $1.19 and $2.69.
What Type Of Bulb Does The Mercedes 280S Tail Light Use?
Most Mercedes 280S models from the late 1960s to the late 1970s use a standard dual-filament bulb like the 1157 for the tail and brake lights. There are some variations depending on the specific year and trim, so it’s a good idea to either check your owner’s manual or pull the old bulb out to find the part number stamped on the base. Using the right bulb ensures everything fits perfectly and works as it should. If you’re thinking about switching to LED bulbs, just be aware there may be some extra steps to prevent issues like warning lights or fast blinking signals.
How Do You Replace A Mercedes 280S Tail Light Bulb?
Replacing a Mercedes 280S tail light bulb is straightforward. Open the trunk and look for the panel covering the back of the tail light assembly. This panel typically pops off or is held by a few screws or clips. Once the panel is out of the way, you’ll see the bulb holders on the inside of the tail light. Twist the bulb socket gently counterclockwise and pull it out. Take out the old bulb and push the new one into place, making sure it’s snug. Reinstall the socket and the cover, and you’re all set.
Why Does My Mercedes 280S Tail Light Bulb Keep Burning Out?
If your tail light bulbs don’t seem to last very long, there are a few things worth checking. Sometimes the tail light assemblies loosen up over the years and let in vibrations that shake the bulbs more than they should. Using bulbs with the wrong wattage or from a lesser brand also causes early failures. Corrosion or a dirty socket can make the bulb work harder and burn out quicker, and a poor ground connection is another common culprit. Whenever you swap out a bulb, take a quick look at the socket—if it looks dirty or rusty, clean it up before putting in the new bulb.
Are There LED Upgrade Options For The Mercedes 280S Tail Light Bulb?
Yes, there are LED upgrades for the Mercedes 280S tail lights. Plenty of manufacturers offer LED bulbs that fit the same 1157 or 1156 sockets as the original-style bulbs. Some owners really like the brighter, crisper light and the fact that LEDs tend to last much longer. If you go this route, keep in mind you might need to install resistors or updated flashers to prevent fast-blinking signals or warning lights on the dash. As always, double check fitment before buying, and opt for bulbs from brands you trust to avoid electrical gremlins.
How Can I Diagnose Electrical Issues With The Mercedes 280S Tail Light Bulb?
If your tail light isn’t working or seems dim, here’s where to start: First, pull the bulb and take a close look for a broken filament or burnt spot. Next, inspect the socket and wiring for any signs of corrosion or loose connections. Using a multimeter or a simple test light, you can check if power is getting to the socket when the lights are on. Make sure the ground point is clean and tight; a weak ground will cause all sorts of odd light behavior. If everything checks out but the light still won’t work, it’s worth following the wiring a little further to look for issues like damaged wires or a faulty switch.
Where Can You Find Reliable Mercedes 280S Tail Light Bulbs?
If you need a new bulb for your Mercedes 280S, AutohausAZ is a solid choice. They offer quality bulbs at fair prices and ship quickly, so you’re not left with an out tail light for long. And if you happen to pick the wrong bulb, their returns system makes it easy to swap it out for the right one. They can help keep your classic Benz looking sharp and staying safe on the road, all without the hassle of dealership prices.
