Mercedes 300SDL Sunroof Switch Parts

Showing 1 out of 1 part(s) found in our catalog.

Narrow Down Your Search By...
Filter search results specific to your vehicle.
Keyword
Keyword
Mercedes 300SDL
Category
Electrical, Lighting and Body
Subcategory
Sunroof Switch
Subcategory
Can't Find What You Need?
Mon-Fri 8-4 MST/PST (Arizona Time)
Contact Us
Sort By:
Please verify appearance, connections, and part number on existing switch prior to ordering. 1 per car.
1986, 1987 Mercedes 300SDL
Available To Order
Available To Order Information Icon
Usually ships within 1-2 business days. Availability is not guaranteed.
$44.99
Reg
$46.86
List
$56.00

The average cost of a Mercedes 300SDL sunroof switch is between $44.99 and $44.99.

Why Isn’t My Mercedes 300SDL Sunroof Switch Working?

If your Mercedes 300SDL sunroof switch isn’t doing its job, you’re not alone. Quite a few owners run into a situation where the sunroof only works one way, or it stops working altogether. Usually, this comes down to an old switch with worn contacts, some grime blocking the electrical connection, or possibly a wiring issue behind the scenes. Sometimes, it’s as simple as a blown fuse or a motor struggling to keep up. If you notice any burnt spots or melting near the switch, that may indicate a bigger electrical problem. A good place to start is taking the switch out and giving it a proper cleaning. After that, it might be time to swap it out for a new or rebuilt one if a cleanup doesn’t sort it out.

How Can I Remove And Replace My Sunroof Switch?

When it comes to replacing the Mercedes 300SDL sunroof switch, you really don’t need a ton of special tools. Use a plastic trim tool to gently pry out the switch, and make sure you disconnect your battery first so you don’t risk a short. Once you have the switch loose, unplug the connector by pulling it back carefully. Pop the new switch in by reversing those steps—reconnect the plug and press the switch back into the dash until it clicks. Before putting everything back together, give your sunroof a quick test to be sure the fix worked.

What Causes The Sunroof Switch To Stop Functioning Intermittently?

If your Mercedes 300SDL sunroof switch only works some of the time, the culprit is often dirty or oxidized contacts inside. Sometimes, the contacts make enough of a connection for the sunroof to move, then cut out unexpectedly. Bad wiring connections or a finicky sunroof relay can also be to blame. If the sunroof works when you press the switch a few extra times, worn-out contacts are probably at fault. Swapping out the switch for a fresh one typically puts an end to the problem.

Where Is The Sunroof Switch Located, And How Do I Access It?

If you haven’t pulled apart your Mercedes 300SDL before, you might not know that the sunroof switch is usually in the center console, just behind the shifter among the other accessory switches. To reach it, slip a plastic pry tool under the trim and gently lift it up—this will help you avoid scratching the interior. Once the trim is off, you’ll spot the Mercedes 300SDL sunroof switch right away and can pop it out if you need to inspect or exchange it.

Is It Possible To Repair The Sunroof Switch Instead Of Replacing It?

Plenty of Mercedes owners actually prefer fixing their Mercedes 300SDL sunroof switch before shelling out for a new one. If it’s just dirty contacts causing the headache, you can open up the switch and clean it with some contact cleaner and a small brush or a cotton swab. Put everything back together and make sure the wiring is snug. But if you find broken or burnt parts inside, or if the plastic is warped from heat, saving time (and future frustration) by replacing the switch is usually your best bet.

Where Can You Find A Mercedes 300SDL Sunroof Switch Easily?

When you need a Mercedes 300SDL sunroof switch, take a look at AutohausAZ. Their prices are reasonable, and you won’t have to jump through hoops to get the part you need. Orders ship out quickly, and if you change your mind, returns are hassle-free. Grabbing your Mercedes 300SDL sunroof switch there is a simple way to check this repair off your list.