Mercedes 560SEC Tail Light Bulb Parts
Showing 13 out of 13 part(s) found in our catalog.
Brand
Keyword
Subcategory
Mon-Fri 8-4 MST/PST (Arizona Time)
Mercedes 560SEC tail light bulb typically cost between $1.19 and $2.69.
How Do I Replace A Mercedes 560SEC Tail Light Bulb?
Switching out a Mercedes 560SEC tail light bulb doesn’t take much time, and you don’t need any special tools—just a Phillips screwdriver and the right replacement bulb. Start by popping your trunk. Look behind the tail light, where you’ll find a trim panel. Remove the securing screws or clips and set the panel aside. You'll see the back of the light assembly with bulb holders in view. Turn the bulb holder counter-clockwise and slide it out. Pull the burnt-out tail light bulb straight out, push the new one in, then reverse all the steps to put everything back together. Before closing things up, flip on your lights and double-check that the new bulb is working.
Which Bulb Type Does The Mercedes 560SEC Use?
For the Mercedes 560SEC tail light bulb, Mercedes typically uses an 1157 or P21/5W bulb, but bulb types sometimes vary, so it’s smart to double-check. Take a look at your car’s manual or inspect the existing bulb for the exact number and wattage. The tail lights use a dual-filament design to handle both brake lights and running lights. Make sure you’re using the right type—proper fit and wattage keep your lighting system reliable and help you avoid electrical issues. Always compare the new bulb side-by-side with the original before you put everything back together.
Why Do My Tail Lights Still Not Work After Replacing The Bulb?
If you’ve put in a new Mercedes 560SEC tail light bulb but the lights still don’t work, there are a few other things to check. Start with the fuse: if it’s blown, swap it out for a new one. Take a good look at the bulb socket—corrosion or burnt spots can block the connection. Sometimes the wiring leading to the socket gets frayed or comes loose. If those all look fine, grab a multimeter and check if the socket’s getting power. Persistent problems usually mean there’s a bigger electrical issue, not just a bad bulb.
Are LED Bulbs Compatible With The Mercedes 560SEC Tail Light?
Lots of owners ask about using LED bulbs instead of the standard Mercedes 560SEC tail light bulb. LEDs are generally available to fit the same housings, but your car’s system wasn’t designed for them. Since LEDs use less power, the car might think the bulb is out—leading to warning lights or rapid flashing. If you’re set on making the upgrade, you may need to add load resistors or swap out the flasher relay for an LED-friendly version. Be sure to check the local laws, too—some places have specific rules for aftermarket lighting.
How Can I Prevent Frequent Burnouts Of My Mercedes 560SEC Tail Light Bulb?
If you keep blowing a Mercedes 560SEC tail light bulb, there might be an underlying issue. A faulty alternator or voltage regulator can send too much power through the system and burn bulbs out quickly. Vibration from loose mounts or incorrect installation can also cause trouble. Make sure the bulb is firmly seated and avoid touching the glass with your fingers, since oil can shorten the bulb’s life. Peek into the socket to check for any signs of moisture or corrosion—these are common culprits behind repeated failures.
Where Can You Find An Affordable Mercedes 560SEC Tail Light Bulb?
AutohausAZ takes the hassle out of finding a Mercedes 560SEC tail light bulb. You’ll get good prices and speedy shipping, so you aren’t left waiting. Need to make a return? It’s easy. The process is straightforward and designed to save you time and money, so you can get back on the road with minimal fuss.
