Mercedes 560SEC Turn Signal Bulb Parts
Showing 10 out of 10 part(s) found in our catalog.
Brand
Keyword
Subcategory
Mon-Fri 8-4 MST/PST (Arizona Time)
The average price of a Mercedes 560SEC turn signal bulb is between $1.19 and $2.49.
What Type Of Bulb Does The Mercedes 560SEC Turn Signal Use?
When you’re swapping out the Mercedes 560SEC turn signal bulb, you’ll want to know exactly what fits best. For most years, the front and rear turn signals call for a single-filament 1156 bulb—amber or clear, depending on the lens and model year. Some versions might also use a 7506 bulb. To be certain, check your owner’s manual or pull the old bulb to match the part number. If you’re unsure, taking the used bulb to your local auto parts shop can save time and guesswork. It’s also smart to go with quality bulbs from reputable brands, which usually last longer and shine brighter for safer driving.
How Do I Replace The Mercedes 560SEC Turn Signal Bulb?
Swapping out the Mercedes 560SEC turn signal bulb is a straightforward job. Start by turning off your engine and, if you’re extra careful, disconnect the battery. Open the hood and find the back of the turn signal housing. The bulb socket typically twists out counterclockwise—just a gentle turn should do it. Pull the old bulb straight out. When putting in the new bulb, avoid touching the glass with your fingers, as oils can shorten its life. Slide it in until it clicks, lock the socket back in place, and test your turn signal before closing everything up. For rear bulbs, you might need to lift the trunk liner for access, but the rest of the process is much the same.
Why Does The Turn Signal Bulb Keep Failing On My Mercedes 560SEC?
If you find yourself replacing your Mercedes 560SEC turn signal bulb more than you’d like, there could be a few reasons. Corroded sockets, loose connections, or even water sneaking into the housing can cause bulbs to burn out ahead of schedule. Sometimes, using cheap aftermarket bulbs or the wrong wattage can also cause problems, either overheating the socket or not lasting as long as they should. Bad roads or worn out suspension can shake bulbs loose, too. Check for signs of rust or moisture in the socket, and make sure you’re installing the right kind of bulb, nice and snug.
Why Is The Mercedes 560SEC Turn Signal Blinking Fast?
A rapidly blinking Mercedes 560SEC turn signal bulb usually points to a burned-out or failing bulb. When one bulb on the circuit isn’t working, the turn signal system picks up on the lower resistance and speeds up as a signal something is wrong. Take a walk around your car and check each turn signal and side marker for bulbs that are out or dim. If they all seem fine, look closer at the sockets for corrosion or any loose wiring. Occasionally, a faulty relay can also cause this, but most of the time it’s just a bulb in need of replacing.
Can I Upgrade The Mercedes 560SEC Turn Signal Bulb To LED?
Upgrading from incandescent to LED bulbs for your Mercedes 560SEC turn signal is definitely possible, and a lot of drivers make the switch for better visibility and longevity. However, since the car’s electrical system expects original-style incandescent bulbs, dropping in LEDs may cause your signals to blink too fast or trigger dashboard warnings. Adding a load resistor or switching to an LED-compatible flasher relay usually solves this problem. Make sure to choose LEDs that fit your existing sockets to avoid installation issues. And after you’re done, test each signal to make sure everything is working as it should.
Looking For A Mercedes 560SEC Turn Signal Bulb?
If you need a new Mercedes 560SEC turn signal bulb, it’s simple to order from AutohausAZ. You’ll find prices that beat most retail stores, and shipping is fast so you get back behind the wheel sooner. If you order the wrong part, our easy returns make it hassle-free to get the right fit. Shop with us and see just how easy car parts shopping can be.
