Mercedes 560SL Turn Signal Bulb Parts
Showing 11 out of 11 part(s) found in our catalog.
Brand
Keyword
Subcategory
Mon-Fri 8-4 MST/PST (Arizona Time)
The average price of a Mercedes 560SL turn signal bulb is between $1.19 and $2.49.
What Type Of Bulb Does The Mercedes 560SL Turn Signal Use?
For the Mercedes 560SL turn signal bulb, you'll need a bayonet-style bulb—usually an 1157 up front and an 1156 in the back. The type will depend on whether you need a single or dual-filament bulb, since the fronts handle both running lights and turn signals, while the rear are typically single-function. Always double-check the original bulb or consult your owner's manual to match the specs for wattage and voltage. Using the wrong type can lead to issues like fast blinking or the bulb not working at all, so be sure to get the right one. It's also smart to peek at the bulb socket while you're there; clean out any corrosion to keep the new bulb working properly.
How Do You Change The Mercedes 560SL Turn Signal Bulb?
Changing the Mercedes 560SL turn signal bulb doesn't require special tools or experience, just a little patience. Start by popping open the trunk or hood, depending on whether you're replacing a rear or front signal. Unscrew or unclip the housing, then gently turn and pull the bulb socket out from the back. To remove the old bulb, press in slightly and twist counterclockwise. Pop in the new bulb the same way, making sure it’s snug and secure. Before putting everything back together, give the signal a quick test to make sure it’s working, then reattach the lens or housing.
Why Is My Mercedes 560SL Turn Signal Blinking Fast After Replacing The Bulb?
If your Mercedes 560SL turn signal bulb starts blinking rapidly after a replacement, it usually means the system senses something’s off. The most common culprit is putting in the wrong type of bulb, or swapping in an LED without a load resistor. A difference in electrical resistance can confuse the relay, making the light flash quicker than normal. Sometimes, it’s just a matter of the bulb not making good contact, or some corrosion in the socket. Double-check the fit and type of bulb, clean the contacts, and if those steps don’t solve it, you may want to have a look at the relay itself.
What Should I Do If The Mercedes 560SL Turn Signal Bulb Still Doesn’t Work After Replacement?
If you’ve swapped in a fresh Mercedes 560SL turn signal bulb and nothing happens, start by making sure the new bulb isn’t a dud. Next, look inside the socket for corrosion or old residue—sometimes a quick clean with contact cleaner and a small brush does the trick. It’s also a good idea to check the fuse for the turn signal circuit, just in case that’s the issue. Wiring and ground faults aren’t as typical, but they do pop up occasionally in older cars, so don’t rule those out. If the basics all check out, the turn signal relay might be next on your troubleshooting list.
Is It Safe To Use LED Bulbs In Place Of The Original Mercedes 560SL Turn Signal Bulb?
LEDs can be a nice upgrade for your Mercedes 560SL turn signal bulb, but it’s not a direct swap in most cases. Since LEDs draw less power, your car might “think” the bulb is out and start blinking too fast—a problem called hyper-flashing. The fix is to install a load resistor or pick an LED that’s made for classic vehicles and won’t cause issues. Before committing, make sure the LED has the right brightness and fits snugly in your existing socket; not all LEDs are created equal when it comes to match and beam pattern. Always check the signals after installation to be sure they’re bright, clear, and blink at the right speed.
Looking For An Affordable Mercedes 560SL Turn Signal Bulb?
Finding the right Mercedes 560SL turn signal bulb shouldn’t mean overspending. At AutohausAZ, you’ll find quality bulbs at a price that works, with fast shipping and a simple returns process if you ever need it. We keep things straightforward, so you get what you need for your 560SL—quick, hassle-free, and without any surprises.
