Mercedes C350 Intake Manifold Parts

Showing 5 out of 5 part(s) found in our catalog.

Narrow Down Your Search By...
Filter search results specific to your vehicle.
Keyword
Keyword
Mercedes C350
Category
Engine
Subcategory
Intake Manifold
Subcategory
Can't Find What You Need?
Mon-Fri 8-4 MST/PST (Arizona Time)
Contact Us
Sort By:
2006, 2007, 2008, 2009, 2010, 2011 Mercedes C350
In Stock
In Stock Information Icon
Leaves warehouse within 1-2 business days.
$329.99
Reg
$343.74
List
$911.00
OEM
The throttle housing mounting holes are not threaded, the mounting bolts are self-tapping. NOTE: This unit can ONLY be returned for warranty exchange, NO refunds will be issued. If you have any question...
2006, 2007, 2008, 2009, 2010, 2011 Mercedes C350
Ships Today
Ships Today Information Icon
Leaves closest warehouse today if ordered before 2 PM MST.
$806.99
Reg
$840.61
List
$911.00
Kit includes HD actuator with metal rod and silicone diaphragm, HD aluminum lever, new pivot bolt, and instructions. Adjuster repair kit installation normally requires intake manifold removal, if you are...
2006, 2007, 2008, 2009, 2010, 2011 Mercedes C350
Ships Today
Ships Today Information Icon
Leaves closest warehouse today if ordered before 2 PM MST.
$165.99
Reg
$172.91
List
$348.92
Intake Plenum; Resonator, Intake Manifold, Air Intake Pipe R350. C300. C350. Ml350. Glk350. Gle350. Slk350. 2013-15. E400 hybrid. From 2/16/12. Sedan/wagon, 3.5L. Sedan/wagon, 2012-13, fm 2/16/12. Sedan/wagon,...
2012, 2013, 2014, 2015 Mercedes C350, C350 Coupe
Ships Today
Ships Today Information Icon
Leaves closest warehouse today if ordered before 2 PM MST.
$417.99
Reg
$435.41
List
$444.00
KIT
This kit contains the updated HD intake manifold adjuster kit along with both intake manifold gaskets to properly udpate your system.
2006, 2007, 2008, 2009, 2010, 2011 Mercedes C350
Ships Today
Ships Today Information Icon
Leaves closest warehouse today if ordered before 2 PM MST.
$185.37
Reg
$193.09
List
$358.12

The average cost of a Mercedes C350 intake manifold is between $165.99 and $806.99.

What Are the Common Symptoms Of A Faulty Mercedes C350 Intake Manifold?

A bad Mercedes C350 intake manifold doesn’t usually hide for long. At idle, the engine might stumble or feel rough, sometimes shaking more than normal. You press the gas and the car feels sluggish or stumbles when you need it to move. Misfires can crop up and that check engine light will glow, pointing to problems with air or fuel delivery codes. Sometimes the car drinks more gas than usual, and you might hear a faint hissing sound under the hood—often a clue that air is sneaking in through a vacuum leak. When the manifold’s internal flaps act up, drivability gets even worse. If a few of these signs hit at once, it’s wise to take a closer look at your intake manifold before the problem grows.

How Much Does It Cost To Replace A Mercedes C350 Intake Manifold?

Swapping out a Mercedes C350 intake manifold is rarely cheap, but prices swing depending on the year and whether you stick with original or aftermarket parts. Expect parts alone to cost anywhere from $400 to $900, sometimes a bit more if the design changed or special sensors come attached. Add in shop labor and the bill jumps: most owners see $500 to $900 just for the work. Gaskets, actuators, or plastic fittings may also need to be replaced, nudging the cost higher. Some folks hunt down used or rebuilt pieces to keep expenses in check. Always get a full quote—it saves headaches when you see the final total, because hidden parts and fresh hoses add up fast.

Can I Drive With A Bad Mercedes C350 Intake Manifold?

You might limp along for a short while, but running your Mercedes with a faulty C350 intake manifold is risky. Problems with the manifold throw the engine’s air-to-fuel mix out of whack, harming performance and pushing the car toward limp mode. Sometimes, broken parts inside get sucked into the engine, causing serious internal damage. A blinking check engine light isn’t something to shrug off—continued driving can turn a minor fix into an expensive breakdown. The safest move is to park the car and get it checked; waiting only makes both stress and the repair bill grow.

What Causes Mercedes C350 Intake Manifold Failure?

Trouble often starts inside the Mercedes C350 intake manifold when plastic gears or actuator arms wear down or snap. Heat and age are tough on plastic, and high miles don’t help. Carbon can build up in the runners, especially if the engine runs rich or oil sneaks in from the PCV system. Gasket leaks or cracks in the main body let air in where it shouldn’t be. Owners who skip maintenance or drive under heavy loads see failure show up even sooner. The older and harder your Mercedes works, the more likely intake issues will show up.

Is Mercedes C350 Intake Manifold Replacement A DIY Job?

For the seasoned DIYer, swapping a Mercedes C350 intake manifold is doable but isn’t a walk in the park. You’ll need the right sockets, patience, and a clear work area. Removal means unplugging a tangle of sensors, fuel lines, and hoses, each with its own little trick. Cleaning the gasket surfaces and following torque specs is key to avoid leaks later. If you aren’t used to working around injectors or electrical parts, a pro might be a safer bet. A single dropped bolt or mixed-up connection can turn a weekend job into a call for help.

Why Choose AutohausAZ For Your Mercedes C350 Intake Manifold?

At AutohausAZ, we know car repairs can leave you feeling overwhelmed, especially when hunting down parts like a Mercedes C350 intake manifold. That’s why we keep our prices low all year—you won’t have to wait for some one-day sale. Orders ship fast, too; often before you’ve finished your coffee. Mistakes happen, so if you get the wrong part, our return process is quick and friendly. People stick with us because we take the drama out of fixing your car and always aim to deliver on price, speed, and real support. Simple and fair—that’s our goal every time you hop on our site.