Mercedes CL600 Coolant Parts

Showing 0 out of 3 part(s) found in our catalog.

Narrow Down Your Search By...
Filter search results specific to your vehicle.
Keyword
Keyword
Mercedes CL600 Coolant
Select category below to view parts.
Can't Find What You Need?
Mon-Fri 8-4 MST/PST (Arizona Time)
Contact Us

We didn't find any parts matching your search query.

Mercedes CL600 coolant is a specially formulated liquid that is used to control the temperature of the engine and prevent it from overheating. It is typically a mixture of water and ethylene or propylene glycol, which serves as the antifreeze agent.

Proper coolant circulation is important because it dissipates the heat generated by the engine and prevents it from damaging internal components. It also lubricates the water pump and other parts of the cooling system, preventing rust and corrosion.

Using the correct type and amount of coolant is essential to maintain the proper functioning of the engine and prevent costly repairs due to overheating, corrosion, or damage to internal parts. It is recommended to follow the manufacturer's instructions for choosing the right coolant and replacing it when necessary.

Type of Coolant for Mercedes CL600

The Mercedes CL600 uses a special type of coolant called Mercedes-Benz Coolant (MBZ Approval 325.0). It is important to use this specific coolant to ensure proper maintenance and avoid any damage to the vehicle's cooling system.

Mercedes CL600 Coolant Capacity by Year

  • 2000-2002 CL600 (5.8L V12 engine): 17.2 quarts (16.3 liters)
  • 2003-2006 CL600 (5.5L V12 engine): 16.2 quarts (15.3 liters)
  • 2007-2014 CL600 (5.5L V12 engine): 16.9 quarts (16 liters)

Please note that these are approximate values and may vary depending on the exact model, individual car specs, and other factors. Also, it is essential to refer to the manufacturer's manual for precise information about the coolant capacity and other maintenance details.

How to Add Coolant to Your Mercedes CL600

  1. Park the car on a level surface and turn off the engine.
  2. Open the hood and locate the coolant reservoir. It's usually labeled with "engine coolant" or "antifreeze."
  3. Check the coolant level by looking at the markings on the side of the reservoir. If the level is low, you need to add more coolant.
  4. Remove the cap from the coolant reservoir carefully. Allow any pressure in the system to release before fully removing the cap.
  5. Fill the reservoir with coolant until it reaches the proper level. Make sure not to overfill above the "max" line on the reservoir, as excess coolant may spill out or damage the system.
  6. Replace the cap securely on the coolant reservoir.
  7. Start the engine and allow it to run for a few minutes. Turn your heater to the maximum setting so it circulates through the engine.
  8. Check the coolant level again after the engine has cooled back down.
  9. If the coolant level is still low, repeat the process until the level remains at the appropriate level, added gradually to prevent overfilling.

It is crucial to use the correct type of coolant for your Mercedes CL600, as advised in its manual. If you are not confident performing any of the above mentioned steps, it is best to seek assistance from a professional mechanic.


At AutohausAZ, you can find the ideal coolant for your Mercedes CL600 coolant. Our extensive range of products ensures that you don't need to waste your time visiting different stores to find the right coolant for your car. We stock top-notch coolants that are compatible with your Mercedes CL600 model and guarantee high performance.

Additionally, shopping at AutohausAZ brings you the advantage of excellent customer service from our experienced team. Our staff is always available to answer any queries or concerns you may have about our products or services. We pride ourselves on providing personalized attention to each customer, ensuring that you have a smooth and hassle-free shopping experience.

Moreover, when you shop at AutohausAZ, you can be assured of quality products from reputable manufacturers. We source our products from trusted suppliers, ensuring that we only offer genuine and high-quality coolants that meet the industry's standards.

Finally, ordering from AutohausAZ is straightforward, with our user-friendly website allowing you to browse and select products with ease. You can also track your order's progress and receive updates until your order arrives at your doorstep, giving you peace of mind and confidence in your purchase.

In summary, shopping at AutohausAZ for your Mercedes CL600 coolant brings several advantages, including a wide range of products, excellent customer service, quality products, and a seamless shopping experience.

Auto Parts We Offer for Mercedes CL600