Mercedes CL63 Turn Signal Bulb Parts
Showing 3 out of 3 part(s) found in our catalog.
Brand
Keyword
Subcategory
Mon-Fri 8-4 MST/PST (Arizona Time)
The average cost of a Mercedes CL63 turn signal bulb is between $0.79 and $28.99.
What Type Of Bulb Does The Mercedes CL63 Turn Signal Use?
If you’re looking to replace the Mercedes CL63 turn signal bulb, it’s important to know the exact type before heading to the auto parts store. For most models, you’ll find either a PY21W or a 7440A bulb for the turn signals, depending on whether you need one for the front or rear. The best bet is to double-check your owner’s manual, or simply pull the old bulb and match it up. Some people switch to LEDs for better brightness and longer life, but you’ll want to make sure any upgrade fits snugly in your car’s socket. The wrong bulb can sometimes cause flashing issues or dash warnings, so don’t skip the details.
How Do I Replace The Turn Signal Bulb On A Mercedes CL63?
Changing out the Mercedes CL63 turn signal bulb isn't too complicated, but having a few pointers helps. Usually, you’ll get access by gently prying off a cover in the trunk or reaching through the wheel well. Once you see the bulb socket, twist it counterclockwise and pull it straight out. Just swap in your new bulb and make sure it’s firmly seated—if it wiggles, it might not work right. Pop the socket back, put the cover on, and then give the turn signal a quick test. Handling bulbs with gloves is a smart move since fingerprints can shorten the life of the bulb.
Why Do My Turn Signals Blink Fast After Changing The Bulb?
A quick-blinking turn signal after you change the Mercedes CL63 turn signal bulb is a problem a lot of people run into. It’s called “hyper-flashing,” and it usually pops up if one of the bulbs is burnt out or when new LED bulbs are put in. Since LEDs use less power, the car’s system sometimes thinks a bulb is out. To stop the fast blink, a lot of drivers add resistors that mimic the power usage of regular bulbs or use CAN bus compatible LEDs. It’s also a good idea to double-check that all the bulbs were installed properly and that none are out.
What Are Signs That The Turn Signal Bulb Needs Replacement?
If your CL63’s turn signal bulb is on its way out, you might see a warning light pop up on the dash, or you’ll hear the blinker clicking much faster than normal. Sometimes the turn signal works off and on, or just stops working completely. If you notice moisture building up inside the light housing, that’s another thing that can speed up bulb failure. Many drivers suggest checking both the bulb and its socket now and then—sometimes, a little corrosion or a loose fit is the real problem, not the bulb itself.
Are There Recommended Upgrades For The CL63 Turn Signal Bulb?
Upgrading your Mercedes CL63 turn signal bulb is a hot topic in car forums. Plenty of folks go for brighter, longer-lasting options from brands like Philips or Sylvania if they want to stick with halogen. LEDs are also a popular pick for their sharp look and increased visibility, but you may need to add a resistor so you don’t get error messages. Just make sure the bulbs are DOT approved, so you don’t run into any issues with inspections or safety checks. It’s always a good move to test everything after installation to be sure your new bulbs play nicely with your car’s electronics.
Need A Mercedes CL63 Turn Signal Bulb Fast?
AutohausAZ has made it simple to find the right Mercedes CL63 turn signal bulb. You’ll get solid deals every time, and their shipping is quick, so you’re not left waiting. If you happen to order the wrong bulb, their return process is straightforward. Shopping for your CL63 is hassle-free, letting you spend less time hunting for parts and more time driving.
