Mercedes CLA250 Oil Filter Parts
Showing 12 out of 12 part(s) found in our catalog.
Brand
Keyword
Category
Select category below to view parts.
Mon-Fri 8-4 MST/PST (Arizona Time)
The average cost of a Mercedes CLA250 oil filter is between $3.79 and $79.99.
The Mercedes CLA250 oil filter is an essential component that helps keep harmful contaminants and debris from entering the engine. It works by creating a barrier that allows the engine oil to flow through while trapping harmful particles. These contaminants can include dirt, dust, debris, metal shavings, and other types of particulate matter that can cause significant engine damage if left unchecked. The oil filter is typically replaced at regular service intervals to ensure the engine remains protected and operates smoothly.
Signs of a Clogged Mercedes CLA250 Oil Filter
- Engine warning light: The oil filter is designed to remove contaminants from the engine oil, and if it gets clogged, the engine oil pressure can drop, triggering the engine warning light on the dashboard.
- Engine performance issues: A clogged oil filter can cause engine performance issues such as sluggish acceleration, reduced power, and rough idling. This is because the engine cannot get adequate lubrication from the oil.
- Unusual engine noises: If the oil filter is clogged, the engine may produce unusual noises such as knocking, tapping, or grinding sounds. These noises indicate that the engine is not getting enough oil.
- Oil leakage: A clogged oil filter can cause the engine oil to back up and leak from various areas of the engine. This can be seen as dark spots or puddles under the car.
- Poor fuel economy: A clogged oil filter can also reduce fuel efficiency, as the engine needs to work harder to overcome the resistance caused by the clogged filter.
Recommended OEM Brands For Mercedes CLA250 Oil Filter
OEM stands for Original Equipment Manufacturer, which means that the oil filters used in a Mercedes CLA250 are made by the same company that manufactures the car itself. In the case of the CLA250, the OEM brand for its oil filter is Mann-Filter.
Mann-Filter is a German company that has been producing high-quality automotive filters since 1941. They produce filters for a wide range of vehicles, including Mercedes-Benz. Their oil filters are designed to meet the specific requirements of each vehicle and provide optimum filtration performance.
The oil filter is an essential component of the vehicle's engine oil system, as it removes contaminants and debris from the oil before it circulates through the engine. A high-quality oil filter ensures that the engine remains clean and lubricated, reducing wear and extending its lifespan.
Using an OEM brand like Mann-Filter ensures that the oil filter is specifically designed for the Mercedes CLA250, providing the best possible filtration and protection for the engine. It also helps maintain the vehicle's warranty coverage, as using non-OEM parts can potentially invalidate the warranty.
In summary, the use of an OEM brand like Mann-Filter for the oil filter on a Mercedes CLA250 ensures the highest level of performance, protection, and warranty coverage for the vehicle.
Mercedes CLA250 Oil Filter Replacement Interval
It is recommended to replace the Mercedes CLA250 oil filter every time you change the engine oil, which is typically every 7,500-10,000 miles or once a year, whichever comes first. However, it is always best to check the owner's manual for specific recommendations for your vehicle.
Replacing the Oil Filter on Your Mercedes CLA250
- Gather the necessary tools and replacement parts. This may include an oil filter wrench, a new oil filter, and new oil.
- Raise the car on a jack or use a hydraulic lift.
- Locate the oil filter. In the Mercedes CLA250, it is located underneath the engine, near the front of the car.
- Use the oil filter wrench to loosen the old oil filter. Turn the filter counterclockwise until it comes loose.
- Remove the old oil filter by hand and dispose of it properly.
- Clean the area around the oil filter with a clean rag.
- Apply a small amount of oil to the gasket on the new oil filter.
- Screw the new oil filter onto the filter housing by hand until it is snug.
- Use the oil filter wrench to tighten the new oil filter another 1/2 turn.
- Lower the car and add new oil to the engine, following the manufacturer's recommended oil type and amount.
- Start the engine and let it run for a few minutes to ensure that oil is circulating properly.
- Turn off the engine and check the oil level again, adding more oil as needed.
- Dispose of the old oil and filter properly.
Buying a Mercedes CLA250 Oil Filter Online
At AutohausAZ, we offer a wide range of oil filters for the Mercedes CLA250 oil filter. Our oil filters are designed to meet and exceed the performance of original equipment manufacturer (OEM) filters, ensuring optimal protection for your engine.
One of the advantages of shopping at AutohausAZ is the high-quality of our products. Our oil filters are made from premium materials and manufactured to rigorous standards, making them a reliable and durable choice for your vehicle.
Another advantage of shopping with us is our competitive pricing. We strive to offer our customers the best possible prices on all of our products, including Mercedes CLA250 oil filters. This helps you save money without sacrificing quality or performance.
In addition to our quality products and competitive prices, we also provide excellent customer service. Our team of experts is always available to answer any questions you may have about our products, and we are committed to ensuring your satisfaction with every purchase.
Overall, shopping for a Mercedes CLA250 oil filter at AutohausAZ is a smart choice for anyone looking for a high-quality, reliable, and affordable product. With our commitment to quality, value, and customer service, we are confident that you will be satisfied with your experience shopping with us.
