Mercedes CLS550 Tie Rod End Parts
Showing 11 out of 11 part(s) found in our catalog.
Brand
Keyword
Subcategory
Mon-Fri 8-4 MST/PST (Arizona Time)
Based on industry averages you can expect to pay between $14.49 and $145.54 for a Mercedes CLS550 tie rod end.
How Can I Tell If My Mercedes CLS550 Tie Rod End Is Bad?
You might notice your steering starting to feel loose or sloppy. Sometimes there’s a knock or a clunk from the front when turning or hitting bumps. Uneven tire wear creeps in, leaving you scratching your head. If you spot a ripped boot or see grease leaking out around the tie rod end, that’s a red flag. The car might not hold a line on the highway either—it wants to wander more than usual. When these symptoms show up, it’s wise to have a technician check things out before a bigger issue pops up.
What Are The Typical Costs Associated With Replacing The Mercedes CLS550 Tie Rod End?
Replacement costs depend on where you take your CLS550 and which parts you pick. Some places charge more if you go for dealer parts, while others offer solid aftermarket options that save a few bucks. Most shops finish the work in about an hour, unless rust or stubborn bolts get in the way. Expect your total bill to land somewhere in the mid to high hundreds, especially if you add an alignment. Costs climb if you stick with original Mercedes parts or use a dealership, but independent shops can be more budget-friendly. Either way, the peace of mind is worth it.
Is An Alignment Required After Replacing A Mercedes CLS550 Tie Rod End?
Yes, you’ll need an alignment. Changing out a tie rod end messes with your car’s ability to keep the wheels pointed straight. Even if you mark the threads and try lining things up by eye, you can’t skip the alignment after the swap-or you risk chewing up new tires or ending up with a crooked steering wheel. Most shops wrap alignment into their service, or you can book it right after. Either way, don’t skip this step if you want your CLS550 to feel right on the road.
What Is The Lifespan Of A Mercedes CLS550 Tie Rod End?
Tie rod ends hold up for years on most CLS550s. Many go well past 100,000 miles, especially if the roads are kind and you steer clear of potholes. Frequent rough roads, salted streets, or hauling heavy loads can cut that lifespan short. It’s smart to have your shop inspect the steering parts during regular maintenance. If one tie rod end fails, the other usually isn’t far behind, so swapping them as a pair can save you a return visit later on.
Can I Replace The Mercedes CLS550 Tie Rod End Myself, Or Is Professional Help Needed?
If you enjoy turning wrenches and own a few specialty tools, you can handle this job at home in the driveway. You’ll need to jack up the car, pull the wheel, and break the tie rod end loose. Mark the old position to avoid throwing off your alignment too much. But if you run into seized parts or feel unsure, there’s no harm in letting a mechanic handle the work. Either route you take, make sure to schedule an alignment after-you’ll notice the difference every time you drive.
Where Can You Find Affordable Mercedes CLS550 Tie Rod Ends?
AutohausAZ has parts that fit your CLS550 and your budget. Prices are competitive, and shipping is quick when you need to get back on the road. If you pick the wrong part, you don’t have to stress—the return process is smooth. Shopping here keeps your Mercedes driving right without emptying your wallet.
