Mercedes CLS63 Oil Pump Flow Control Valve Parts
Showing 2 out of 2 part(s) found in our catalog.
Brand
Keyword
Subcategory
Mon-Fri 8-4 MST/PST (Arizona Time)
The average price of a Mercedes CLS63 oil pump flow control valve is between $63.99 and $73.99.
What Are The Signs Of A Failing Mercedes CLS63 Oil Pump Flow Control Valve?
Drivers often notice small changes first. You might spot a warning light flicker on the dash, or hear an unusual ticking or even a faint grinding noise from under the hood. The oil gauge might dip, showing lower pressure than normal. Some owners say the oil light pops on when the car is idling, then disappears at speed. If the valve becomes stuck, oil could leak, or the pressure could actually get too high, not just drop. Most of these signals come and go at first—they’re easy to brush off. But ignoring them leads to bigger trouble, sometimes even serious engine damage. Catching it early saves money, time, and a headache later on.
How Do You Diagnose Issues With The Mercedes CLS63 Oil Pump Flow Control Valve?
A mechanic starts with a scan tool. If there’s a code, that helps. If not, they’ll usually hook up a mechanical oil pressure gauge and watch it under different conditions—cold start, warmed up, high revs, low revs. Odd readings mean something’s off. Sometimes, they’ll check for blocked oil passages or pull the valve to look for gunk. On rare days, it’s really just a sensor or wiring issue, so good shops make sure there’s not a mix-up. Owners who’ve gotten their oil changed at random shops or used questionable oil brands need to mention that—those details matter.
What Causes The Mercedes CLS63 Oil Pump Flow Control Valve To Fail?
Most failures trace back to dirty oil. Skip an oil change, or use stuff that doesn’t meet Mercedes specs, and sludge starts to build up. Over time, that gunk can block the valve or slow it down until it sticks. Sometimes parts just wear out, especially if the car’s seen a lot of miles. Additives that don’t mix with factory specs, or mistakes like double-dosing cleaners, can speed up the problem too. From time to time, a valve may leave the factory with a defect, but that’s rare. Regular care cuts down these risks.
Can The Mercedes CLS63 Oil Pump Flow Control Valve Be Cleaned Or Should It Be Replaced?
Light sludge inside the valve? Cleaning might work. A good mechanic will try to clear it if the metal isn’t scored or damaged. If the valve’s worn, cracked, or obviously stuck, though, there’s not much to do but replace it. Most shops don’t take a chance once things look iffy. After swapping in a new part, a full oil flush makes sense. No one wants old grime taking out a second valve the same way.
What Is The Typical Cost To Replace The Mercedes CLS63 Oil Pump Flow Control Valve?
The price depends on several things: where you get the part, and the shop’s hourly rate. The valve itself usually runs from $120 up to $250. Labor adds more since the job is fiddly and can stretch to three hours. All told, expect a bill somewhere between $400 and $700, though big city dealerships often charge the most. Always ask for a quote and check if there’s a warranty on the shop’s work—sometimes that peace of mind is worth a few dollars more.
Looking For A Mercedes CLS63 Oil Pump Flow Control Valve?
At AutohausAZ, we get it—you don’t want to gamble with the parts your Mercedes depends on. Our selection of genuine oil pump flow control valves is priced right and ships fast, so your CLS63 isn’t parked in the driveway for long. If you ever need to send a part back, our return policy is straight to the point, with no long hold times or surprise fees. Count on our service team to help sort out any questions. When your Mercedes needs this valve, you can trust us to make the process simple from start to finish.
