Mercedes E320 Sway Bar Link Parts
Showing 20 out of 21 part(s) found in our catalog.
Brand
Keyword
Category
Select category below to view parts.
Mon-Fri 8-4 MST/PST (Arizona Time)
The average cost of a Mercedes E320 sway bar link is between $2.89 and $55.99.
What Does The Mercedes E320 Sway Bar Link Do?
The Mercedes E320 sway bar link acts as the bridge between the sway bar and the suspension arms. Its job is to keep both sides of the suspension tied together, so the car stays flatter and more stable when you steer around a corner or hit uneven pavement. If you like that planted, steady feel in a Mercedes, this little part plays a big role. Once it goes bad, you’ll probably notice the car rolling or shifting more than usual in turns, which can mess with your confidence behind the wheel. It’s a simple link, but it holds things together and helps your E320 stick to the road.
How Can I Tell If My Mercedes E320 Sway Bar Link Needs Replacement?
A worn Mercedes E320 sway bar link can make itself known in a few ways. You might catch a rattle, thump, or knocking noise when you go over speed bumps or rough streets. Sometimes the steering feels loose or the car leans more than you remember. If you pop the hood or get under the car, a bad link might look bent, or you’ll see bushings that are split, cracked, or missing. Grease marks on or near the link are a red flag. If any of these show up, it’s probably time to swap out the part.
What Is The Usual Lifespan Of A Mercedes E320 Sway Bar Link?
Most drivers get about 60,000 to 100,000 miles before a Mercedes E320 sway bar link starts to wear. That’s under normal driving and decent roads. If you hit potholes a lot, drive in winter with salt, or corner hard, you could need new links sooner. When your mechanic is under the car for an oil change or tire rotation, they can take a look and spot trouble early. If your handling isn’t as steady as it used to be or noises start piling up, don’t put it off—changing worn links now can save you from bigger problems later.
Can I Replace The Mercedes E320 Sway Bar Link Myself Or Should I Go To A Mechanic?
If you have a safe way to lift your car, a basic set of tools, and some patience, you can tackle the Mercedes E320 sway bar link at home. Unbolting the old link and fitting the new one isn’t complex work, though the fasteners might be tight or rusty. For anyone unsure about working under a car or if you just want it done right the first time, a mechanic is the way to go. They’ll swap the part and check everything for proper torque, so you leave with peace of mind and a car that drives straight.
What Happens If I Don’t Replace A Worn Mercedes E320 Sway Bar Link?
Let a bad Mercedes E320 sway bar link slide long enough, and your car’s handling starts to suffer. More body roll sneaks in, cornering can feel unsettled, and sudden movements might catch you off guard. Sometimes, a broken link lets the sway bar hang after bumps or turns, which can bang against other parts or drag on the road. Keep ignoring it, and you might end up with bigger suspension issues—and a higher repair bill. Handling problems are not just about comfort; they matter for safety, too.
Need A Hassle-Free Mercedes E320 Sway Bar Link?
AutohausAZ makes finding the right Mercedes E320 sway bar link quick and easy. Our site has low prices and good stock, so you don’t need to cross-shop or wait forever for shipping. Not the part you need? Returns are no hassle. Get your car back on the road without the headache, and save some money while you’re at it.
