Mercedes ML500 Brake Pad Sensor Parts
Showing 10 out of 10 part(s) found in our catalog.
Brand
Keyword
Subcategory
Mon-Fri 8-4 MST/PST (Arizona Time)
The average price of a Mercedes ML500 brake pad sensor is between $1.84 and $13.99.
The Mercedes ML500 brake pad sensor is a component that monitors the thickness of the brake pads in your vehicle. It is designed to alert you when the brake pads are worn down and need to be replaced. The sensor sends a signal to the vehicle's warning system, leading to a warning light or message on the dashboard. This helps to ensure that you are aware of the brake pad's condition and can take necessary action to maintain the braking performance and safety of your vehicle.
The Mercedes ML500 typically has two brake pad sensors, one for the front brake pads and one for the rear brake pads. These sensors are designed to monitor the thickness of the brake pads and alert the driver when they need to be replaced.
Replacing Brake Pad Sensors On A Mercedes ML500
Replacing the brake pad sensor on a Mercedes ML500 involves several steps. Here is a step-by-step guide:
- Gather the necessary tools and materials: You will need a new brake pad sensor, a jack, jack stands, a lug wrench, a socket wrench set, a flathead screwdriver, and a wire cutter.
- Ensure safety: Park your vehicle on a level surface and engage the parking brake. Put on safety goggles and gloves before starting any work.
- Lift the vehicle: Use the jack to lift the front or rear part of the vehicle, depending on which brake pad sensor you are replacing. Place jack stands under the vehicle for support and ensure stability before continuing.
- Remove the wheel: Loosen the lug nuts using a lug wrench. Once loose, use the jack to fully remove the wheel and set it aside in a safe location.
- Locate the brake pad sensor: The brake pad sensor is usually attached to the brake caliper mounting bracket. Look for a small electrical connector with wires leading to it.
- Disconnect the sensor: Carefully disconnect the electrical connector by gently pushing down on the plastic tab and pulling the connector apart.
- Remove the old sensor: Use a flathead screwdriver or wire cutter to carefully release any clips or retaining pins holding the sensor in place. Pull out the old sensor from its position.
- Install the new sensor: Take the new sensor and align it properly with the mounting bracket. Push it into place until it clicks or snaps securely.
- Reconnect the electrical connector: Match the connector of the new sensor with the corresponding connector on the vehicle. Push the two connectors together until they lock into place.
- Reinstall the wheel: Lift the wheel back onto the wheel hub and hand-tighten the lug nuts. Lower the vehicle to the ground using the jack and remove the jack stands. Finally, use a lug wrench to fully tighten the lug nuts in a star pattern.
- Repeat the process: If you need to replace the brake pad sensor on the other side, repeat steps 3-10 for the remaining wheel.
Once completed, start your vehicle and ensure that the brake pad sensor is working correctly by checking for any warning lights on the dashboard. It's always a good idea to double-check your work and test the brakes before driving the vehicle.
Top Mercedes ML500 Brake Pad Sensor Brands for Sale
Genuine Mercedes: As the name suggests, Genuine Mercedes brake pad sensors are manufactured by the Mercedes-Benz brand itself or by their approved partners. These parts are designed to meet the high quality standards set by Mercedes-Benz and are considered to be of original equipment level quality. Due to their association with the vehicle manufacturer, Genuine Mercedes parts are typically priced higher compared to other brands. However, they offer the assurance of a perfect fit and optimal performance for your Mercedes ML500.
Bowa: Bowa is a well-known manufacturer of automotive brake pad sensors that produces aftermarket parts for various vehicle makes and models. They offer a range of brake pad sensors for the Mercedes ML500 that are designed to provide reliable performance at a more affordable price point than Genuine Mercedes parts. Bowa's brake pad sensors are manufactured to meet industry standards and are often considered a reliable alternative to OEM (Original Equipment Manufacturer) parts.
Febi: Febi is another reputable aftermarket brand that manufactures a wide array of automotive parts, including brake pad sensors. They have been supplying the automotive industry for many years and are known for their commitment to producing high-quality components. Febi produces brake pad sensors that are designed to meet or exceed OEM specifications, ensuring proper fitment and functionality. While Febi parts might not carry the same brand recognition as Genuine Mercedes parts, they are generally regarded as reliable and cost-effective alternatives.
In summary, Genuine Mercedes brake pad sensors are the highest quality option for your Mercedes ML500, manufactured directly by Mercedes-Benz or their approved partners. Bowa and Febi, on the other hand, are aftermarket manufacturers offering reliable and more affordable alternatives. Ultimately, the choice between these brands depends on individual preferences, budget considerations, and the level of assurance desired for optimal braking performance.
Find Great Deals on Mercedes ML500 Brake Pad Sensor
AutohausAZ offers a wide range of advantages for customers looking to purchase brake pad sensors for their Mercedes ML500. Firstly, the extensive selection of brake pad sensors ensures that customers can easily find the exact part they need for their vehicle. The website presents a user-friendly interface, making it simple for customers to navigate and quickly locate the desired product.
In addition to the convenience of finding the right brake pad sensor, AutohausAZ also provides high-quality parts. Their focus on supplying genuine and OEM brake pad sensors guarantees that customers receive products that meet the highest standards. This ensures optimal performance and compatibility with the Mercedes ML500, giving customers peace of mind knowing that they are purchasing top-quality components.
Moreover, AutohausAZ's commitment to customer satisfaction is evident through their exceptional customer service. They have a knowledgeable and dedicated team of experts who are readily available to answer any questions or offer assistance. This level of support ensures that customers receive the guidance they need throughout the purchasing process, making it a smooth and pleasant experience.
Another advantage of shopping at AutohausAZ is the competitive pricing. They aim to provide their customers with cost-effective options without compromising on quality. Customers can expect fair and affordable prices for their brake pad sensors, allowing them to save money while still receiving a reliable product.
Furthermore, AutohausAZ values efficiency and quick delivery. Once a customer makes a purchase, they will experience fast shipping, ensuring that their brake pad sensor arrives promptly. This means that customers can get their Mercedes ML500 back on the road without unnecessary delays.
Overall, AutohausAZ offers several advantages when it comes to shopping for brake pad sensors for the Mercedes ML500. With a wide selection, high-quality products, exceptional customer service, competitive pricing, and efficient shipping, customers can confidently rely on AutohausAZ for all their brake pad sensor needs.
