Audi 100 Turn Signal Bulb Parts
Showing 7 out of 7 part(s) found in our catalog.
Brand
Keyword
Subcategory
Mon-Fri 8-4 MST/PST (Arizona Time)
Audi 100 turn signal bulb typically cost between $1.69 and $2.19.
How Do I Replace An Audi 100 Turn Signal Bulb?
Replacing the Audi 100 turn signal bulb is pretty straightforward. First, pop the hood and look for the turn signal housing up near the front corners of the car. Unplug the power connector from the back, and then twist the socket counterclockwise to remove it. Take out the old bulb and slide in the new one, making sure it’s firmly in place. Twist the socket back in, reconnect the power, and then check to see if your new turn signal bulb is working. On some models, you might have to unscrew a few fasteners before you can reach the housing. It’s always smart to check the owner’s manual for details on the bulb type and tips for avoiding damage during the swap.
What Size Or Type Of Bulb Does The Audi 100 Turn Signal Use?
Most Audi 100 models use a standard amber or clear 1156 or 7506 single-filament bulb for the front signal lights. For the rear, it could be the same or you might need a dual-filament 1157 depending on your car’s setup. Bulb types can change a bit between years and trim levels, so it’s a good idea to check your owner’s manual or take the old bulb with you when shopping for a replacement. Using an incorrect bulb can mean fast blinking, poor fit, or electrical issues. Matching the specs to your specific Audi is the safest move.
Why Is My Audi 100 Turn Signal Blinking Fast After Bulb Replacement?
If you notice your Audi 100 turn signal bulb is blinking faster than normal after putting in a new one, it usually means there’s an issue with the bulb or the connection. This happens when the car senses a change in electrical resistance—often caused by the wrong bulb, a loose fit, or some corrosion in the socket. Double-check to make sure the bulb is the right type and is sitting tight in the socket. It’s also worth giving the contacts a quick cleaning. Check your fuses and relays too, just to rule them out. If it's still blinking fast, try swapping in a new bulb from a reputable brand and see if that sorts it out.
Can I Use LED Bulbs Instead Of Incandescent For My Audi 100 Turn Signals?
Lots of folks upgrade their Audi 100 turn signal bulb to LEDs, since they last longer and are usually brighter. Just keep in mind that if you swap out the original bulbs for LEDs without adding a resistor, you'll probably get that fast-blinking (hyper-flash) problem, since LEDs draw less power. If you're going to use LEDs, pick up a resistor kit or an electronic flasher relay that works with them. Stick with high-quality LED bulbs made for cars to avoid electrical gremlins. And if you’re unsure about the rules, a quick check of your local laws about colored bulbs can save you a potential hassle down the road.
What Should I Do If The Audi 100 Turn Signal Bulb Still Doesn’t Work After Replacement?
If your new Audi 100 turn signal bulb still won’t light up, start by making sure it’s properly seated and the contacts are nice and clean—sometimes a little corrosion is all it takes to stop it working. Check for a blown fuse or a faulty relay in the circuit. Take a glance at the wiring too, just in case there’s a break or loose connection. Every once in a while, the issue is with the hazard switch itself, since it can share some wiring with the turn signals on older Audis. If nothing seems obvious and you’re still having trouble, a quick visit to a mechanic can help pinpoint the exact cause.
Looking For An Affordable Audi 100 Turn Signal Bulb?
At AutohausAZ, we make it easy and affordable to find the right Audi 100 turn signal bulb. Our prices are much lower than the dealership’s, and we ship quickly so you can get back on the road without a long wait. Returns are simple, too—no headaches if you need to send something back. For a hassle-free shopping experience and great deals on your Audi 100 turn signal bulb, you’re in the right place.
