Audi 200 Ignition Switch Parts
Showing 1 out of 1 part(s) found in our catalog.
Brand
Keyword
Category
Select category below to view parts.
Mon-Fri 8-4 MST/PST (Arizona Time)
The average cost of a Audi 200 ignition switch is between $15.39 and $15.39.
What Are Common Symptoms Of A Faulty Audi 200 Ignition Switch?
When your Audi 200 ignition switch is on its way out, the car starts acting up in ways you can’t miss. Sometimes the key doesn’t want to turn, or it feels stuck with extra resistance. You might catch the dash lights flickering, staying dark, or coming on when they shouldn’t. Occasionally, the engine won’t crank or makes no sound at all. If the car stalls for no clear reason, or the radio, AC, or other electronics cut out while driving, the ignition switch sits high on the list of possible culprits. Some days, these things disappear only to return again. If they keep happening, your ignition switch is probably to blame.
How Do I Replace The Audi 200 Ignition Switch?
Getting the Audi 200 ignition switch swapped out isn’t the hardest job in the world, but it does take care, especially behind the wheel. First, disconnect the battery. It keeps your hands safe and avoids frying anything important. Remove the plastics around the steering column, which exposes the ignition switch hiding behind the lock cylinder. Look for screws or clips, depending on the year. Unplug the connector, slide the old switch out, then drop the new Audi 200 ignition switch in its place. Before you button everything up, turn the key to test. If it all works, reassemble the covers and get back to driving.
Can A Faulty Audi 200 Ignition Switch Drain The Battery?
A Audi 200 ignition switch going bad often creates strange issues, battery drain among them. Sometimes, parts inside the switch don’t cut power like they should when you turn the key off. That means headlights or small circuits keep running with the car parked, pulling charge through the night. Suddenly, your Audi won’t start in the morning, or you keep jumping the battery week after week. If new batteries don’t help, swapping the ignition switch usually solves the mystery.
How Much Does It Cost To Replace An Audi 200 Ignition Switch?
Replacing a Audi 200 ignition switch doesn’t break the bank, but costs add up. In most shops, expect a bill between $150 and $300, with labor being most of it. The switch alone can be cheap—between $30 and $80—depending on which brand you pick. If you tackle the job yourself, you’ll save money. Not everyone is comfortable removing steering column pieces, though, so paying a mechanic makes sense for many.
What Causes The Audi 200 Ignition Switch To Fail?
After years of turning keys, the Audi 200 ignition switch wears out from use. Inside, metal contacts get tired or the mechanism loosens with each start. Sometimes, an electrical short fries things or a bit of water creeps in and causes corrosion. Sloppy key turns, using a heavy keychain, or starting the engine over and over don’t help its cause, either. With older cars like the Audi 200, age alone is enough to send the ignition switch to the end of the line.
Looking For A Reliable Audi 200 Ignition Switch?
If a new ignition switch is what you need, AutohausAZ has a selection ready. We keep it simple—prices are low but the parts hold up. Expect your order to arrive fast, since we ship right away. Wrong part? No problem, just use our easy returns. Car repairs don’t get much easier than this.
