Audi 90 ABS Relay Parts

Showing 1 out of 1 part(s) found in our catalog.

Narrow Down Your Search By...
Filter search results specific to your vehicle.
Keyword
Keyword
Audi 90
Category
Electrical, Lighting and Body
Subcategory
ABS Relay
Subcategory
Can't Find What You Need?
Mon-Fri 8-4 MST/PST (Arizona Time)
Contact Us
Sort By:
Used for ABS, sunroof, alarm, radiator fan, etc. depending upon model.
1988, 1989, 1990, 1991 Audi 90, 90 Quattro
Ships Tomorrow
Ships Tomorrow Information Icon
Leaves closest warehouse tomorrow.
$10.19
Reg
$10.61
List
$21.95

Audi 90 abs relay typically cost between $10.19 and $10.19.

What Are The Symptoms Of A Bad Audi 90 ABS Relay?

If the Audi 90 ABS relay fails, you might see the ABS warning light stick on. Sometimes, the brake pedal will feel off, maybe a little soft or inconsistent. In some cases, the ABS system won’t work at all, so there’s no pulsing during a hard stop. Clicking or buzzing near the relay or control module under the hood when you turn the key is common too. Most drivers say the regular brakes still work, but the car can skid in slippery spots when the ABS doesn’t kick in. If you notice any of this, check the Audi 90 ABS relay before moving to more costly repairs.

Where Is The Audi 90 ABS Relay Located?

The Audi 90 ABS relay sits in the fuse and relay box under the hood, usually on the passenger side by the firewall. Some cars have labels right on the box, so you can spot “ABS” on the diagram. Other times, you’ll need to look for a part number or compare the relay to the manual. Relays can be wedged close together, so double-check you have the right one before trying to remove it. Sometimes dust and older stickers make it tricky, but careful inspection pays off when pulling the Audi 90 ABS relay out.

How Can I Test The Audi 90 ABS Relay?

Start by removing the Audi 90 ABS relay from its spot. Grab a multimeter and check the switch terminals for resistance with power applied. A working relay clicks and shows almost zero resistance when activated. If you hear nothing or the readings bounce around, chances are the relay has failed. You can also try to apply 12 volts to the coil and listen for that solid click. If nothing happens, the Audi 90 ABS relay is likely done for. Always handle the test carefully to avoid grounding anything or causing a short.

Can I Drive My Car With A Faulty Audi 90 ABS Relay?

Yes, you can still drive if the Audi 90 ABS relay goes bad, but you lose the ABS system. On dry roads with gentle stops, you probably won’t feel a difference. In bad weather or if you need to stop quickly, things can get risky. Wheels might lock up and the car can skid. That could mean trouble in an emergency, so it’s best not to wait long before getting the relay swapped out. ABS helps keep you in control and, without it, stopping safely is harder when things go wrong.

Is It Hard To Replace The Audi 90 ABS Relay?

Swapping the Audi 90 ABS relay isn’t tough. Just pull the relay box lid, wiggle out the old relay, and push the new one in place. No special tools are needed. Watch for the correct alignment and match the part numbers so you don’t put in the wrong relay. When you’re done, close everything up, start the car, and check if the ABS light has shut off. If it’s still on, make sure the new relay is seated tight and that you grabbed the right replacement.

Looking For Affordable Audi 90 ABS Relay?

AutohausAZ helps you track down the right Audi 90 ABS relay at a solid price. These relays ship out fast, and the return process is simple if you need it. You save money without hassle, and your car gets back on the road without extra stress. Good prices, quick shipping, no headaches—just what you need when your ABS system needs attention.