Audi allroad Tail Light Parts
Showing 9 out of 9 part(s) found in our catalog.
Brand
Keyword
Category
Select category below to view parts.
Mon-Fri 8-4 MST/PST (Arizona Time)
Audi allroad tail light typically cost between $1.49 and $3.59.
How Do I Replace My Audi Allroad Tail Light Bulb?
When it’s time to change the Audi allroad tail light bulb, just pop open your rear hatch and look for the access panel on the inside of your trunk, right near the light. Remove the screws or fasteners you find there, and carefully wiggle the entire assembly out from the body. Depending on your model year, you’ll likely need to turn the bulb socket counterclockwise to pull it free. Swap the old bulb for a fresh one (check your owner’s manual for the correct type and wattage). Once the new bulb is in, be sure everything’s seated snugly and that you tighten down the assembly to keep moisture out. Before you finish, give your lights a quick check to make sure the new Audi allroad tail light is working.
Why Is My Audi Allroad Tail Light Flickering Or Not Working?
If your Audi allroad tail light is flickering or out, start with the basics—see if the bulb itself is burned out or has any dark spots. If not, check for any dirty or corroded contacts in the socket, and give those a good cleaning. Sometimes loose or damaged wiring can interrupt power to the tail light, so inspect the harness for wear or breaks. On 2013 and newer models, water getting inside the assembly is a known issue that can mess with the electrical parts. Sorting out minor problems now will keep your Audi allroad tail light shining bright and help you avoid bigger electrical headaches later.
What Type Of Replacement Bulb Does The Audi Allroad Tail Light Use?
Wondering which bulb you need for your Audi allroad tail light? Most often, it’s a P21W or 1156, but it depends on your year and trim. Certain models come with LED modules instead of traditional bulbs. Your best bet is to double-check the manual or pull out the original for an exact match. Using the proper bulb or LED module (correct size, voltage, and style) will keep your Audi allroad tail light bright and error-free—plus, you won’t have to worry about dashboard warning lights from a mismatched part.
Can I Upgrade My Audi Allroad Tail Light To LED?
A lot of Audi owners are switching their Audi allroad tail light bulbs over to LEDs for better lighting and longer life. If your car uses traditional bulbs, LED upgrades are usually straightforward—just be sure to get quality, road-legal LEDs and add resistors if needed to avoid warning messages. Some models are already LED from the factory; going aftermarket in those cases can mean more involved work, like coding or changing wiring. With the right parts, an LED upgrade brings a modern look and dependable performance to your Audi allroad tail light.
Why Does My Audi Allroad Tail Light Have Condensation Inside?
If you notice fog or water droplets forming inside your Audi allroad tail light, there's a good chance the seal isn’t doing its job anymore—or the housing could be cracked. A little condensation isn’t unusual (it often clears up on its own), but standing water or regular fogging means it’s time to act. Inspect the tail light and seals for damage or gaps. Reseal with silicone or swap in fresh gaskets if needed. Fixing it early helps keep your Audi allroad tail light looking good and working as it should.
Looking For The Best Audi Allroad Tail Light Deals?
At AutohausAZ, we know how much you care about keeping your Audi allroad in top shape. When you shop tail lights with us, you’ll find some of the best prices around, plus quick shipping so you’re not left waiting. If something doesn’t work out, our easy returns make it simple to swap or send it back. We’re here to help—so you can get your Audi back on the road and save a little money, too.
