Audi S8 Tail Light Parts
Showing 8 out of 8 part(s) found in our catalog.
Brand
Keyword
Category
Select category below to view parts.
Mon-Fri 8-4 MST/PST (Arizona Time)
The average cost of a Audi S8 tail light is between $1.49 and $2.49.
How Do I Replace The Audi S8 Tail Light Assembly?
When it’s time to swap out the Audi S8 tail light, you don’t need to make things complicated. Open the trunk and look for the trim or liner behind the light—there are usually a few screws or clips to remove. Once that’s out of the way, find the wiring harness, unplug it, and take out the bolts holding the tail light in place. Gently pull the light assembly free, then fit the new one in, reconnect everything, and secure it with the original hardware. Before buttoning up the trim, hit the brake and turn signals to check everything is working as it should. Always check that your replacement matches your model year’s part number.
Why Is My Audi S8 Tail Light Flickering Or Not Working?
A flickering or dead Audi S8 tail light can be a pain. This usually happens because of a worn-out bulb, loose wiring, or sometimes water finding its way inside. On newer models, LEDs might fail if the solder joints or internal components wear out over time. Start by looking for a broken bulb or obvious wiring issues, like corrosion or a loose plug. If you see water droplets inside, chances are the seal has given up, and the whole unit may need replacing. If the problem persists and the light is an LED, it’s often best to let a specialist take a look.
What Bulb Type And Size Does The Audi S8 Tail Light Use?
Trying to figure out which bulbs fit your Audi S8 tail light? It really comes down to the year of your S8. Some years use basic halogen bulbs—usually standard wedge styles for brake and turn signals. Others use LED set-ups where you can’t replace the bulbs by themselves. Your owner’s manual or the original bulb will have the exact type and wattage info you need. Using the wrong bulb can trigger warning lights or even damage the system, so always double-check. If you’ve got an LED assembly and it’s out, the whole unit usually needs replacing.
How Can I Address Condensation Inside The Audi S8 Tail Light?
If you spot moisture or fog in your Audi S8 tail light, chances are there’s a crack or the seal isn’t tight anymore. Check around the edges and look for gaps. Sometimes you can dry it out with silica packs, or let the unit air out, but unless you seal it up again with automotive silicone, the problem will likely come back. If you keep seeing fog inside, replacing the light is often the better solution since lingering moisture can mess with the wiring and bulbs over time.
Is It Possible To Upgrade Or Customize The Audi S8 Tail Light?
A lot of S8 fans like to personalize their cars, and the Audi S8 tail light is a popular spot for upgrades. There’s a big range of aftermarket choices, from subtle smoked lenses to dynamic LED tails with cool sequential turn signals. Most of these are designed to fit right in where the old ones were, but double check they’ll hook up to your wiring and fit your specific year. Also, check local laws so you don’t end up with lights that aren’t road legal. Some owners even upgrade with OEM lights from a newer S8, which can require a bit of extra wiring or programming.
How Can You Save On Audi S8 Tail Lights?
At AutohausAZ, we know how important it is to keep your Audi S8 looking sharp, so we offer Audi S8 tail lights at prices that won't empty your wallet. Our shipping is fast, so you’ll have your part in no time. If the tail light isn’t exactly right, sending it back is a breeze. We make it easy to get the quality parts you need for less.
