BMW 128i Coolant Parts
Showing 20 out of 62 part(s) found in our catalog.
Brand
Keyword
Category
Select category below to view parts.
Mon-Fri 8-4 MST/PST (Arizona Time)
BMW 128i coolant typically cost between $2.19 and $139.99.
BMW 128i coolant is a type of liquid that is used to regulate the temperature of the engine. It is important because it helps prevent overheating and freezing of the engine. The coolant flows through the engine, absorbing heat, and then carries this heat to the radiator, where it is dissipated into the surrounding air. The coolant also plays an important role in protecting the engine from corrosion, lubricating the water pump, and preventing the formation of deposits inside the engine. Without coolant, the engine could overheat, causing serious damage and potentially leading to engine failure.
Type of Coolant for BMW 128i
The BMW 128i uses a type of coolant called BMW Long Life 100% antifreeze/coolant.
BMW 128i Coolant Capacity by Year
The coolant capacity for the BMW 128i by year range and engine size is as follows:
- 2008-2013: 2.5 gallons (9.5 liters) for the 3.0L engine
- 2011-2013: 1.9 gallons (7.2 liters) for the 3.0L engine (with electric water pump)
- 2012-2013: 2.6 gallons (9.8 liters) for the 3.0L engine (with mechanical water pump)
How to Add Coolant to Your BMW 128i
- Park the car on a flat surface and turn off the engine.
- Open the hood and locate the coolant reservoir, which should be located near the front of the engine compartment on the driver's side. It is a transparent tank with a blue cap on top.
- Check the level of coolant in the tank. If it is below the minimum level, add more coolant until it reaches the maximum level.
- To add coolant, unscrew the cap and pour in the coolant slowly using a funnel. Make sure not to overfill the tank.
- After adding coolant, replace the cap securely.
- Start the engine and let it run for a few minutes, then check the coolant level again to ensure it is at the appropriate level.
At AutohausAZ, our customers have access to a wide range of genuine BMW 128i coolant products that are designed to meet the specific needs of their vehicles. Our selection of OEM coolant products is sourced directly from top manufacturers, ensuring that you receive premium-quality liquids that are engineered to provide optimal performance for your car.
When shopping with us, you can expect to benefit from our commitment to quality and customer satisfaction. We go above and beyond to ensure that our customers are fully satisfied with their purchases by providing detailed product descriptions, technical support, and expert advice to help you choose the right coolant for your BMW 128i.
Additionally, our prices are highly competitive, so you can shop with confidence knowing that you are getting the best value for your money. Whether you need a small bottle for a DIY project or a large quantity for professional use, we have you covered with our extensive inventory of BMW 128i coolant products.
So why wait? Visit AutohausAZ today and experience the many advantages of shopping with us for all your BMW 128i coolant needs!
