BMW 135i Turn Signal Bulb Parts
Showing 10 out of 10 part(s) found in our catalog.
Brand
Keyword
Subcategory
Mon-Fri 8-4 MST/PST (Arizona Time)
The average cost of a BMW 135i turn signal bulb is between $0.89 and $7.69.
What Type Of Bulb Does The BMW 135i Turn Signal Use?
If you need to replace a BMW 135i turn signal bulb, you’ll usually find the front and rear turn signals use different types. Most 135i models come from the factory with a PY21W amber bulb, though some later or modified vehicles might have an LED setup. Before buying, check your owner’s manual or look at the markings on your existing bulb for a match—this helps make sure you’re getting exactly what you need. You can go with the standard bulb or look into LED alternatives if you want a modern touch, as long as you stick to what’s legal in your area and ensure the fit is right.
How Do I Replace The BMW 135i Turn Signal Bulb?
Swapping out a BMW 135i turn signal bulb doesn’t take much time. For the front, just pop the hood, find the back of the headlight, and twist out the socket. On the rear, you’ll need to peel back part of the trunk lining to get to the socket. Pull the old bulb straight out, slide in the new one (try not to touch the glass directly), then put everything back together and check that it works. Some areas are tight, so a small tool might help. Before finishing up, flick the turn signal to make sure all is working as it should.
Why Does My BMW 135i Turn Signal Blink Fast After Bulb Replacement?
If your BMW 135i turn signal bulb is suddenly blinking much faster after a swap, don’t worry—it’s a common issue. This usually means the circuit thinks there’s a bulb out or the resistance has changed, which often happens with LED upgrades that don’t match the old bulb’s specs. The fix? Check that every signal bulb is working, and if you just switched to LEDs, add a load resistor designed for your car. That’ll get the blink rate back to normal.
Is It Safe To Upgrade To LED Turn Signal Bulbs On The BMW 135i?
Thinking about swapping in LEDs for your BMW 135i turn signal bulb? It’s a popular upgrade for a reason: LEDs shine brighter, react quicker, and usually last a lot longer. That said, some extra work may be needed. To keep your warning lights off and the blink speed right, you might need to add a resistor or adapter that works with the BMW’s built-in monitoring system. Just be sure the lights you pick are road-legal in your state and visible in daytime traffic to stay safe and avoid headaches.
How Do I Diagnose A Non-Working BMW 135i Turn Signal Bulb?
If a BMW 135i turn signal bulb isn’t working, start simple: check the bulb—look for a dark spot, loose filament, or cloudy glass. Next, peek at the socket for rust or moisture, which can block the circuit. If all seems okay, check the fuse and wiring since they can sometimes be at fault after years of use. If both signals on one side are out, a relay or the switch itself might be the culprit. Working through these steps will lead you right to the problem so you can get your signals flashing again.
Looking For A BMW 135i Turn Signal Bulb Deal?
If you’re after a good price on a BMW 135i turn signal bulb, check out AutohausAZ. Their deals help you save money and skip the usual hassle—plus, you’ll get a quality part shipped quickly. And if anything’s not right, their returns are a breeze. Order with confidence and get your BMW’s blinkers back to normal without fuss.
