BMW 2002 Sway Bar Bushing Parts
Showing 15 out of 15 part(s) found in our catalog.
Brand
Keyword
Subcategory
Mon-Fri 8-4 MST/PST (Arizona Time)
The average cost of a BMW 2002 sway bar bushing is between $1.69 and $70.99.
What Are The Symptoms Of Worn BMW 2002 Sway Bar Bushing?
Is your classic BMW 2002 making odd noises over bumps or rough roads? One sign of worn BMW 2002 sway bar bushing is a rattle or clunk you can't ignore, usually somewhere near the front or rear wheels. Steering might feel loose or less direct, especially when cornering fast. The car may roll more than usual in sharp turns. Sometimes, just looking at the bushings tells the story—cracks, splits, or too much movement show it’s time for new ones. If your drive feels off, get under the car and have a look at those bushings.
Which Bushing Material Should I Use For My BMW 2002 Sway Bar?
Choosing the right BMW 2002 sway bar bushing comes down to how you use your car. Rubber bushings are what the factory used—soft, they mute noise and keep the ride smooth. If you just need comfort with no fuss, rubber fits the bill. Polyurethane bushings, on the other hand, are stiffer. They give tighter handling and more road feel, perfect if you enjoy the twisty backroads or plan to autocross. They do pass along more road noise, though, so it’s a tradeoff. Think comfort vs. control when picking your BMW 2002 sway bar bushing material.
How Do I Replace The BMW 2002 Sway Bar Bushing?
Ready to swap out your BMW 2002 sway bar bushing? Start by parking on flat ground and getting the car safely up on jack stands. Find the sway bar under the car. The bushings live inside small clamps. Take those bolts out, open the clamps, and pull out the old bushings—sometimes they need a bit of persuasion. Clean up the surface before slipping in the new bushings. Line up the brackets, thread the bolts in, and tighten everything down. Lower the car and take it for a spin. If bolts are rusted solid, don’t force things—sometimes heat or a shop’s help is needed when the old hardware fights back.
What Size Sway Bar Bushing Does My BMW 2002 Need?
It’s easy to get the wrong size BMW 2002 sway bar bushing. To get it right, measure the sway bar’s thickness where the bushing sits—usually between 18 and 25mm, but double-check. Use a caliper if you can, or hold different wrenches to the bar until one fits snugly. Aftermarket sway bars may be larger than factory, so don’t guess. Match your new bushing to the actual size of the bar on your car. Don’t just order “BMW 2002 bushings” and hope for the best; confirm the measurement first.
Can I Upgrade To A Thicker Sway Bar With The Same Bushing Brackets?
Thinking about beefing up your sway bar? If you pick a thicker one, the stock BMW 2002 sway bar bushing brackets may not fit. Bigger bars need bigger bushings and larger brackets to hold them steady. If your new sway bar doesn’t come with hardware, you’ll want to find a full kit or get brackets sized to match. Using the old ones with oversize bushings usually leaves a loose fit, and you’ll end up with more noise—or worse, a bar that shifts while driving. Get the right brackets before starting the job.
Need Affordable BMW 2002 Sway Bar Bushings With Fast Shipping?
At AutohausAZ, every order gets personal attention. We know your BMW 2002 deserves high-quality parts without breaking the bank. That’s why we keep sway bar bushings in stock, priced right. It’s simple—order, and we ship fast. No drawn-out delays, no excuses. If plans change or if something isn’t spot-on, our returns process keeps things easy. We believe in honest service, quick shipping, and making sure the process is smooth from start to finish. It’s why so many classic BMW fans come back year after year. Get your BMW 2002 sway bar bushing from us, and get right back to what you love—driving.
