BMW 3.0CS Engine Oil Parts
Showing 20 out of 29 part(s) found in our catalog.
Brand
Keyword
Subcategory
Mon-Fri 8-4 MST/PST (Arizona Time)
The average cost of a BMW 3.0CS engine oil is between $9.69 and $79.99.
BMW 3.0CS engine oil is a specific type of oil recommended by BMW for use in their 3.0CS model vehicle. It is important because it lubricates the engine's moving parts, reduces friction and wear, and helps to keep the engine clean by preventing the buildup of sludge and deposits. Using the correct type of engine oil can also improve fuel efficiency and extend the life of the engine. Failure to use the recommended engine oil can result in poor engine performance, increased engine wear, and potential engine damage.
Types of Engine Oil for BMW 3.0CS
- Motul 8100 X-cess gen2: This engine oil is specifically designed for high-performance BMW 3.0CS models. It provides excellent wear protection, reduces engine deposits and sludge build-up, and improves fuel economy. The oil has a viscosity grade of 5W-40, and it is fully synthetic.
- Liqui Moly: Liqui Moly engine oils are known for their exceptional quality and performance. For the BMW 3.0CS, Liqui Moly recommends its Top Tec 4200 5W-30 engine oil. This oil is fully synthetic and meets BMW Longlife-04 specifications. It provides outstanding engine cleaning properties and excellent wear protection.
- Castrol Edge: Castrol Edge is another popular brand of engine oil that is suitable for the BMW 3.0CS. Its 0W-40 viscosity grade and advanced formula provide superior protection against wear, deposits, and overheating. Additionally, this oil helps to improve fuel efficiency and reduce emissions.
- Total Quartz 9000 Energy: Total Quartz 9000 Energy is a fully synthetic engine oil that is specifically formulated for high-performance vehicles like the BMW 3.0CS. This oil provides exceptional wear protection, maintains engine cleanliness, and extends the life of critical engine components. Its 5W-40 viscosity grade makes it ideal for use in colder climates.
BMW 3.0CS Oil Capacity
The engine oil capacity for the BMW 3.0CS by year is as follows:
- 1971-1972 model years: 7.9 quarts
- 1973 model year: 7.4 quarts
- 1974 model year: 6.9 quarts
Changing the Engine Oil in Your BMW 3.0CS
Here are the steps to change the engine oil in a BMW 3.0CS:
- Gather the necessary tools and equipment – new oil filter, drain pan, funnel, rags, and a wrench.
- Warm up the engine for a few minutes by starting it and letting it run.
- Lift the car with a jack and secure it on jack stands.
- Locate the oil drain plug underneath the car.
- Place the drain pan underneath the drain plug.
- Using the wrench, loosen the drain plug and let the oil drain into the pan.
- While the oil is draining, remove the old oil filter from the engine using the wrench.
- Coat the rubber gasket on the new oil filter with a small amount of oil.
- Screw the new oil filter onto the engine using your hand.
- Tighten the oil filter with a wrench until it's snug.
- Once all the oil has drained, replace the drain plug using the wrench.
- Pour the new oil into the engine using a funnel.
- Check the oil level with the dipstick and add more oil if needed.
- Start the engine and let it run for a few minutes.
- Check for any leaks around the oil filter and drain plug.
- Turn off the engine and check the oil level again.
- Lower the car from the jack stands.
- Dispose of the used oil and filter properly.
At AutohausAZ, our customers can enjoy great benefits when shopping for BMW 3.0CS engine oil. Firstly, we offer a wide range of high-quality engine oils that are specifically formulated for BMW 3.0CS vehicles. This means that our customers can rest assured that they are getting the right product for their vehicle.
Secondly, our engine oils are competitively priced, ensuring that our customers get the best value for their money. We understand that keeping a BMW 3.0CS in good working condition can be expensive, which is why we strive to offer our customers affordable prices without compromising on quality.
Thirdly, we take pride in our exceptional customer service. Our knowledgeable and experienced team is always ready to assist our customers in finding the right engine oil for their BMW 3.0CS. We understand that our customers may have questions or concerns, and we are always happy to provide helpful advice and support.
Finally, shopping at AutohausAZ is convenient and easy. We offer a user-friendly website where our customers can browse our products, make purchases, and track their orders. Our streamlined checkout process ensures that our customers can complete their transactions quickly and securely.
In summary, shopping at AutohausAZ for BMW 3.0CS engine oil offers our customers access to a wide range of quality products at competitive prices, exceptional customer service, and a convenient online shopping experience.