BMW 3.0S Tail Light Parts
Showing 4 out of 4 part(s) found in our catalog.
Brand
Keyword
Category
Select category below to view parts.
Mon-Fri 8-4 MST/PST (Arizona Time)
Based on industry averages you can expect to pay between $1.99 and $2.69 for a BMW 3.0S tail light.
Why Is My BMW 3.0S Tail Light Not Working?
If your BMW 3.0S tail light isn’t working, it’s usually something simple like a blown bulb or fuse. Old wiring and sockets can also be to blame, especially if they’ve picked up some rust or dirt over time. On older cars, trunk hinges sometimes pinch the wiring, so give those a look too. Check for any moisture or corrosion inside the tail light, since that can keep it from lighting up. Usually, a quick inspection and replacing any worn-out parts fix the issue—and a careful install helps prevent future problems.
What Are the Correct Replacement Bulbs for the BMW 3.0S Tail Light?
For the BMW 3.0S tail light, you’ll want bulbs that match what the factory used. Most of these models take 1157 dual-filament bulbs for tail/brake lights and 1156 for the reverse or signal. It’s worth double-checking your owner’s manual or the original tail light for specifics. Stick to quality brands—the color and brightness are more consistent, so both sides look the same. If the lights still look dim after swapping bulbs, giving the contacts and lenses a good cleaning can make a surprising difference.
How Do I Remove or Replace the BMW 3.0S Tail Light Assembly?
To swap out the BMW 3.0S tail light, pop the trunk and unhook the negative battery cable for safety. Look for screws or nuts holding the tail light to the body, usually hidden behind the trunk’s trim. Gently remove them, being careful with old plastic lenses. Pull the assembly straight back, and unplug the wiring connector. Make a note of where each bulb goes so reassembly is easy. When you’re ready, reverse the steps to fit everything back together and check that it all lights up as it should.
Why Does My BMW 3.0S Tail Light Fill with Water or Fog Up?
If your BMW 3.0S tail light keeps getting foggy or fills with water, there’s probably a leak. Over the years, the seals and gaskets can dry out or crack, letting moisture sneak inside. That water can lead to corroded connections, blown bulbs, or a cloudy lens. Dry the inside of the housing—either by removing the bulbs and letting it air out, or carefully using a hair dryer on a low setting. Replacing old seals or adding a little sealant around the edges usually solves the problem for good.
Can I Upgrade My BMW 3.0S Tail Light to LED?
You can swap the BMW 3.0S tail light bulbs for LED versions if you want a brighter, longer-lasting light. Just check that any LEDs you buy fit the old bulb sockets and are the right brightness. Sometimes, LEDs draw less power and can cause fast-blinking turn signals or dash warnings, but resistors or special bulbs can fix that. Some owners like the clean look of LEDs, but you can always go back to incandescent if you prefer to keep things original.
Where Can You Find Affordable BMW 3.0S Tail Lights?
You can find budget-friendly BMW 3.0S tail lights at places like AutohausAZ. They offer good prices on genuine and aftermarket parts, and their shipping is quick. If you ever need to return something, the process is easy and straightforward. So, if you’re looking to replace your tail light without hassle, AutohausAZ is a solid choice to get your BMW back on the road.
