BMW 3.0SI Tail Light Parts
Showing 20 out of 20 part(s) found in our catalog.
Brand
Keyword
Category
Select category below to view parts.
Mon-Fri 8-4 MST/PST (Arizona Time)
The average cost of a BMW 3.0SI tail light is between $0.89 and $209.99.
What Causes the BMW 3.0SI Tail Light to Stop Working?
There are a few common reasons your BMW 3.0SI tail light might stop working. Most often, it’s just a burned-out bulb or a worn-out socket. Sometimes, a blown fuse or wiring problem is to blame. If you drive in areas with wet weather or lots of road salt, corrosion inside the tail light assembly can disrupt the connection. On occasion, the tail light control module—the part that manages the lights—can malfunction. If you’re troubleshooting, start by checking the bulb and fuse. If the problem keeps coming back, take a closer look at the wiring and sockets for any damage or signs of wear.
How Can I Replace the BMW 3.0SI Tail Light Bulb?
To swap out your BMW 3.0SI tail light bulb, start by popping open the trunk and locating the panel behind the tail light. Remove any screws or clips, then carefully pull back the liner for access. You’ll see the bulb holder at the rear of the light assembly—twist it out and pull the old bulb free. Fit in the new bulb, twist the holder back into place, and reconnect any wiring. Before closing everything back up, turn on your lights to double-check that it’s working. Using the right bulb type will help you avoid electrical quirks later on.
Why Does the BMW 3.0SI Tail Light Fill with Water?
If you notice water inside your BMW 3.0SI tail light, it’s usually because a seal has failed or there’s a hairline crack in the lens or housing. Over time, the rubber gasket that keeps moisture out can become brittle or shift out of place. Bumps, scrapes, or even changes in temperature can also work small gaps into your light assembly. When water sneaks inside, it can cause bulbs to burn out quickly or lead to rust and electrical trouble. Cleaning out the moisture and resealing with weatherproof silicone or a new gasket can usually solve minor leaks. If the damage is severe, a replacement assembly might be your best bet.
Are Aftermarket BMW 3.0SI Tail Lights a Good Replacement Option?
Aftermarket BMW 3.0SI tail light units can be a cost-effective alternative, but not all are created equal. Premium aftermarket brands often fit and perform nearly as well as genuine parts. Budget options, on the other hand, might be a tight squeeze—or not bright enough to match your other lights. Some might even trip your car’s warning system if the wiring or resistance doesn’t match up. For peace of mind, sticking with reputable brands or OEM-rated parts can save you headaches down the road. If you’re set on a fresh look, just make sure you’re buying from a trustworthy source and that the lights come with a proper warranty.
What Can Cause the BMW 3.0SI Tail Light Warning on the Dash?
When you get a BMW 3.0SI tail light warning on your dashboard, it’s often a simple fix like changing a bulb. But sometimes the issue runs deeper. A corroded socket, damaged wiring, or a glitchy control module can trip the system. Occasionally, even a new bulb with the wrong specs will confuse the warning sensors. If your tail light looks fine on the outside but the warning won’t go away, check the contacts for moisture or use a diagnostic tool to scan for more clues. Sorting it out quickly keeps you safe and saves you trouble with inspections.
Looking for an Affordable BMW 3.0SI Tail Light?
At AutohausAZ, we make it easy to get the BMW 3.0SI tail light you need at a price that makes sense. Our deals are always competitive, so you can shop without worrying about overpaying. Most orders ship fast, so your parts get to you quickly. If the tail light you pick isn’t quite right for your car, our hassle-free returns help make it right. We’re here to keep your BMW in top shape—without the stress or the high price tag.
