BMW 323is Air Intake Hose Parts

Showing 8 out of 8 part(s) found in our catalog.

Narrow Down Your Search By...
Filter search results specific to your vehicle.
Keyword
Keyword
BMW 323is
Category
Air and Fuel Delivery
Subcategory
Air Intake Hose
Subcategory
Can't Find What You Need?
Mon-Fri 8-4 MST/PST (Arizona Time)
Contact Us
Sort By:
KIT
This kit contains the commonly replaced Genuine BMW intake air boots connecting your AMS to the throttle body.
1999 BMW 323is
Ships Tomorrow
Ships Tomorrow Information Icon
Leaves closest warehouse tomorrow.
$101.82
Reg
$106.06
List
$95.16
OEM
This boot includes the Y-connection for the idle control valve as well. On some models this is an updated version and also requires additional connecting ring 13541435626 and clamp 07129952131. 1 per car.
1999 BMW 323is
Ships Tomorrow
Ships Tomorrow Information Icon
Leaves closest warehouse tomorrow.
$14.19
Reg
$14.78
List
$37.38
OEM
1998, 1999 BMW 323is
Ships Tomorrow
Ships Tomorrow Information Icon
Leaves closest warehouse tomorrow.
$30.99
Reg
$32.28
List
$68.71
1999 BMW 323is
Ships Tomorrow
Ships Tomorrow Information Icon
Leaves closest warehouse tomorrow.
$12.89
Reg
$13.43
List
$26.27
Connector for updated air intake boot connection to air mass sensor boot. Also need 07129952131 clamp. 1 per car.
1999 BMW 323is
Ships Tomorrow
Ships Tomorrow Information Icon
Leaves closest warehouse tomorrow.
$10.09
Reg
$10.51
List
$7.19
OEM
1999 BMW 323is
Ships Tomorrow
Ships Tomorrow Information Icon
Leaves closest warehouse tomorrow.
$14.49
Reg
$15.09
List
$26.27
Only for cars with ASC+T.
1998, 1999 BMW 323is
Ships Tomorrow
Ships Tomorrow Information Icon
Leaves closest warehouse tomorrow.
$18.99
Reg
$19.78
List
$66.09
KIT
This kit contains the commonly replaced Genuine BMW intake air boots connecting your AMS to the throttle body.
1999 BMW 323is
Ships Tomorrow
Ships Tomorrow Information Icon
Leaves closest warehouse tomorrow.
$78.07
Reg
$81.32
List
$71.12

BMW 323is air intake hose typically cost between $10.09 and $101.82.

What Are The Signs Of A Failing BMW 323is Air Intake Hose?

If your BMW 323is air intake hose starts failing, you might notice the engine stumbling at idle or reacting slow when you press on the gas. Sometimes, the engine stalls out of nowhere, and you may hear a faint but steady hissing sound coming from under the hood. That sound usually means air is escaping somewhere it shouldn’t. Check the dashboard for that check engine light. This warning pops up if the mass airflow sensor starts getting odd readings because of a leak. A quick visual check often reveals splits, cracks, or spots where the hose looks worn. Leaving this unchecked can make your car run lean, causing poor fuel mileage and weak acceleration. Swapping in a new hose sooner rather than later helps keep your BMW running strong.

How Difficult Is It To Replace The BMW 323is Air Intake Hose?

Swapping out the BMW 323is air intake hose falls right in the middle in terms of difficulty. Most folks with a socket set and some patience can get it done without much trouble. Plan on setting aside at least half an hour. Sometimes the clamps are tough to reach, and lining up both ends of the hose so nothing kinks can take a little juggling. Be careful around small vacuum lines and wiring—these can be fragile. Many owners combine the hose replacement with their routine air filter change, making for less hassle down the line. Doing both at once means fewer headaches later.

Can A Damaged Air Intake Hose Cause Engine Codes?

Yes, a torn or cracked BMW 323is air intake hose lets in air that doesn’t get measured by the engine’s sensors. The computer reacts by tossing up codes for things like lean fuel trim or mass airflow errors. Sometimes the check engine light appears after you notice rough running, sometimes it pops up first. These codes can mimic sensor failures, but the real issue is in the air path, not the electronics. Always inspect the hose before sinking money into new parts you might not need.

What Material Is Best For Replacement BMW 323is Air Intake Hoses?

Most owners stick with reinforced rubber when they’re picking out a new BMW 323is air intake hose. It holds up well against heat and oil, and it’s what BMW used originally. Some drivers switch to silicone hoses for extra strength and flexibility—these are good for cars with upgrades or that see harsh conditions. Silicone lasts longer, but can be tricky to fit because it isn’t as pliable. Either way, double-check that the part matches the size and shape of your car’s factory hose, or you might run into headaches at installation.

Where Should I Inspect For Cracks Or Leaks On The BMW 323is Air Intake Hose?

Look for problems first where the BMW 323is air intake hose connects to the throttle body, and then trace the hose toward the airbox. Squeeze the sides and look for splits that might hide in the bends, especially around any ribbed or flexible sections. Clamps need to be snug but not so tight they pinch the hose. Pay close attention at every joint and curve—these weak spots tend to open up with age. Give it a thorough look every time you’re under the hood, and you’ll often catch leaks before they become bigger trouble.

Why Choose AutohausAZ For Your BMW 323is Air Intake Hose?

AutohausAZ knows how much your BMW 323is matters to you, and making repairs shouldn’t add stress to your week. When you order a BMW 323is air intake hose from us, you get a part you can trust at a price that won’t cut into your budget. We keep shipping quick so you won’t be waiting around with the hood up. Returns are just as easy—if the part isn’t quite right, send it back without any runaround. Our team is easy to reach for help or advice, and we’re always looking to make your buying experience better. You deserve fair prices, honest service, and support from real people who understand cars. With AutohausAZ, you can get your BMW sorted and back on the road with less hassle.