BMW 325CI Brake Pad Sensor Parts
Showing 6 out of 6 part(s) found in our catalog.
Brand
Keyword
Subcategory
Mon-Fri 8-4 MST/PST (Arizona Time)
The average price of a BMW 325CI brake pad sensor is between $4.89 and $22.49.
The BMW 325CI brake pad sensor is a component that is integrated into the brake pads of the vehicle. Its primary function is to detect the condition of the brake pads and alert the driver when they are worn down to a certain level. When the brake pads become thin and need to be replaced, the sensor will trigger a warning light on the dashboard, indicating that it is time to have the brake pads serviced. This is an important safety feature that helps drivers maintain optimal braking performance by ensuring timely replacement of worn brake pads.
The BMW 325CI typically has two brake pad sensors, one for the front brake pads and one for the rear brake pads.
Replacing Brake Pad Sensors On A BMW 325CI
- Gather necessary tools and materials: brake pads, brake pad sensor, socket set, flathead screwdriver, jack, jack stands, torque wrench, brake cleaner, and a C-clamp.
- Find a safe and level surface to park your vehicle. Engage the parking brake for added safety.
- Loosen the lug nuts on the wheel of the BMW 325CI that you want to replace the brake pad sensor for. Do not remove them completely at this stage.
- Use a jack to lift the vehicle off the ground. Place jack stands under the vehicle for stability.
- Fully remove the lug nuts and take off the wheel to gain access to the brake assembly.
- Locate the brake pad sensor, which is mounted onto the brake pad itself. It is usually a small wire that connects to an electrical connector.
- Carefully disconnect the electrical connector from the sensor by gently pulling it apart. Be cautious not to damage the wires or connector.
- Remove any retaining clips or screws that hold the brake pad sensor in place. This may vary depending on the specific model year of your BMW 325CI.
- Once the sensor is detached, inspect it for any signs of wear or damage. If the sensor is triggered and worn down, replacing it is necessary.
- Install the new brake pad sensor by reversing the removal steps. Secure it in place with retaining clips or screws, depending on the design.
- Reconnect the electrical connector to the new sensor. Ensure it is firmly connected and properly seated.
- Now, check the brake pads while you have access to them. If they are worn down significantly, it would be wise to replace them at the same time as the sensor.
- If the brake pads are being replaced, remove them as per the manufacturer's instructions. Use a C-clamp to compress the piston back into the brake caliper.
- Clean the brake caliper, rotor, and surrounding areas using brake cleaner to remove any dirt or debris.
- Install the new brake pads, ensuring they are properly aligned and seated in the caliper.
- Put the wheel back onto the vehicle and hand tighten the lug nuts.
- Lower the vehicle off the jack stands using the jack.
- Use a torque wrench to properly tighten the lug nuts according to the manufacturer's specifications.
- Repeat the process for any additional brake pad sensors that need replacement.
- Test your brakes by gently applying pressure to the brake pedal. Make sure they feel responsive and there are no unusual noises or vibrations.
Note: It is recommended to consult the vehicle's owner's manual or seek professional assistance if you are unsure or uncomfortable performing this task.
Top BMW 325CI Brake Pad Sensor Brands for Sale
Bowa:
Bowa is a well-known manufacturer of automotive brake pad sensors. Their brake pad sensors for the BMW 325CI are known for their reliability and durability. Bowa's sensors are designed to meet or exceed the original equipment specifications set by BMW. They are known for using high-quality materials and advanced manufacturing techniques to ensure consistent performance and accurate brake pad wear detection. Bowa sensors are a popular choice among BMW enthusiasts who value both performance and longevity.
Genuine BMW:
Genuine BMW parts are manufactured specifically for BMW vehicles by the auto parts manufacturers chosen by BMW. These parts are held to the highest quality standards set by BMW, ensuring that they are of original equipment quality. Genuine BMW brake pad sensors for the 325CI are designed to fit perfectly and function seamlessly with the vehicle's braking system. While these parts may be the most expensive option, they provide peace of mind knowing that you are getting parts directly from the vehicle manufacturer and maintaining the vehicle's integrity.
Febi:
Febi is a trusted aftermarket brand that offers a range of automotive parts, including brake pad sensors. Febi brake pad sensors for the BMW 325CI are designed to provide reliable performance at a more affordable price point compared to genuine branded parts. Although they are not manufactured by BMW, Febi places emphasis on quality and ensures that their sensors meet or exceed industry standards. Febi sensors are known for their compatibility, ease of installation, and accurate brake pad wear detection. They provide a cost-effective alternative without compromising on functionality or reliability.
In summary, Bowa, Genuine BMW, and Febi are all reputable manufacturers of brake pad sensors for the BMW 325CI. Bowa and Genuine BMW offer parts that are specifically designed for BMW vehicles, with Genuine BMW being the direct OEM option. Febi, on the other hand, provides reliable aftermarket options that offer good quality at a more affordable price. Ultimately, the choice between these manufacturers depends on individual preferences, budget, and the level of adherence to OEM standards desired.
Find Great Deals on BMW 325CI Brake Pad Sensor
Shopping at AutohausAZ for your BMW 325CI brake pad sensor offers numerous advantages. First and foremost, AutohausAZ provides a wide selection of high-quality brake pad sensors specifically designed for your BMW model. This ensures that you can find the perfect fit for your vehicle without any compromises.
Additionally, AutohausAZ offers competitive pricing on their extensive range of brake pad sensors, allowing you to obtain the necessary part without breaking the bank. The affordability of their products allows you to maintain the performance and safety of your BMW without straining your budget.
Furthermore, AutohausAZ prioritizes customer satisfaction by providing reliable and efficient service. Their commitment to delivering exceptional products and ensuring customer happiness sets them apart from other retailers. With their prompt and reliable shipping, you can expect a hassle-free shopping experience and have your brake pad sensor delivered right to your doorstep in a timely manner.
Lastly, AutohausAZ's dedication to quality is reflected in their partnerships with reputable manufacturers. By sourcing their brake pad sensors from trusted brands, they guarantee that you receive a reliable and durable product that meets or exceeds OEM specifications. This not only ensures the longevity and performance of your brake system but also provides peace of mind knowing that you are investing in a top-notch product.
In conclusion, shopping at AutohausAZ for your BMW 325CI brake pad sensor offers a multitude of advantages, from a diverse selection and competitive pricing to reliable shipping and quality assurance. When it comes to finding the right brake pad sensor for your BMW, AutohausAZ is undoubtedly a reliable choice.
