BMW 325IS Engine Oil Parts
Showing 20 out of 30 part(s) found in our catalog.
Brand
Keyword
Subcategory
Mon-Fri 8-4 MST/PST (Arizona Time)
The average cost of a BMW 325IS engine oil is between $10.69 and $309.94.
BMW 325i typically needs synthetic high-performance engine oil, i.e., 5W-30 or 5W-40 grade. Engine oil is responsible for lubricating the moving parts of the engine, minimizing friction and wear and tear. Engine oil also cools the engine as it transfers heat, cleans as it filters out contaminants, and seals as it holds compression. One needs to replace the engine oil at regular intervals to keep the engine in its best form and for the engine's life span, so that the vehicle can run smoothly and efficiently.
Types of Engine Oil for BMW 325IS
- Castrol Edge 5W-30: A full synthetic engine oil that is designed to provide high-performance vehicles with better performance and protection. It boasts good viscosity stability and maintains a clean engine.
- Liqui Moly Leichtlauf High Tech 5W-40: This is a fully synthetic oil for modern engines that ensures optimal lubrication and reduces wear. It is a fuel economy improver with favorable cold start properties.
- Genuine BMW Twin Power Turbo 0W-30: This is a synthetic oil designed for BMW engines and provides them with enhanced protection and performance, enhancing engine operation overall and lowering emissions.
- Liqui Moly Molygen 5W-40: This synthetic oil has a special green color. It delivers increased wear protection and improved fuel efficiency. It's made to minimize friction and increase engine durability.
BMW 325IS Oil Capacity
- 1987-1991 (E30): Around 5.3 quarts
- 1992-1995 (E36): Approximately 6.9 quarts
Changing the Engine Oil in Your BMW 325IS
- Collect the materials and tools you'll need, such as a new oil filter, the right type of oil, a set of wrenches, an oil catch pan, and a funnel.
- Drive the car onto a flat surface and engage the parking brake for safety's sake.
- Raise the front of the vehicle with a jack and support it with jack stands to create clearance underneath.
- Find the oil drain plug underneath the engine and place the oil catch pan underneath it.
- With the correct wrench, carefully loosen and remove the oil drain plug and let the old oil drain completely into the pan.
- After draining, replace and tighten the oil drain plug firmly.
- Find the oil filter and remove it using an oil filter wrench. Be careful of the additional oil that will drain out.
- Ready the new oil filter by putting a thin layer of new oil on its gasket, then replace the old one with it.
- Open the hood and take off the oil filler cap on top of the engine.
- Pour the new engine oil into the engine using the funnel, making sure you put in the correct amount as indicated in the manual of your car.
- Put the oil filler cap back on tightly after adding oil.
- Start the engine and idle it for a few minutes, looking around the drain plug and oil filter for leaks.
- Switch off the engine and inspect the oil level using the dipstick and top up as required to achieve the recommended level.
- Discard the used oil and filter at an auto parts store or a recycling facility that accepts them.
Purchasing BMW 325IS engine oil from AutohausAZ is a wise decision for both auto enthusiasts and regular commuters. Our discounted prices, which are significantly lower than elsewhere, enable you to maintain your car without emptying your pockets. We even offer you quick shipping so that your BMW 325IS engine oil is delivered on time when you require it. Plus, our hassle-free returns policy makes it easy to buy with confidence. At AutohausAZ, we keep your BMW maintenance both convenient and affordable.

