BMW 440i Tail Light Parts
Showing 11 out of 11 part(s) found in our catalog.
Brand
Keyword
Category
Select category below to view parts.
Mon-Fri 8-4 MST/PST (Arizona Time)
BMW 440i tail light typically cost between $7.89 and $310.99.
How Do I Replace My BMW 440i Tail Light?
To swap out your BMW 440i tail light, start by popping the trunk and pulling back the interior liner nearest the light. You’ll spot the screws or fasteners holding the tail light in place—remove these, then gently disconnect the wiring. Slide out the old unit and set the new one in its place, making sure all connections click in securely and any seals or gaskets sit flat. Tighten everything back up and push the liner into place. Take your time and work carefully to avoid snapping any clips or scratching your paint. If you run into trouble, a quick search for a video walkthrough or asking fellow BMW owners can help.
Why Does My BMW 440i Tail Light Keep Getting Moisture Inside?
If you’re seeing moisture or fog inside your BMW 440i tail light, chances are the gasket is letting water in, or there’s a small crack in the plastic. These leaks usually show up after rain or a car wash, leading to condensation or even electrical gremlins. Double-check the gasket along the edge where the light meets the car, and look for any fine cracks in the lens. Replacing a damaged gasket or the whole assembly generally clears things up. Also, make sure all bolts and clips are tightened evenly, and the vent holes aren’t blocked—this helps stop water from sneaking in.
Are LED Upgrades for BMW 440i Tail Lights Worth It?
Switching your BMW 440i tail light to LEDs makes sense for a lot of drivers. LEDs are brighter, react faster, and have that sharp, updated look—plus, they can help you stand out on the road at night. It’s important to pick a good set, preferably one that’s DOT-approved, to steer clear of any legal or quality issues. There are plenty of bolt-in kits, but double-check compatibility with your model before buying. Some kits need an extra adaptor or coding to keep your dashboard happy. Most people find the upgrade straightforward and worth it for the boost in both safety and style.
What Causes My BMW 440i Tail Light To Flicker Or Fail?
If your BMW 440i tail light is flickering or not coming on, there could be a few things behind it—worn-out bulbs, frayed wires, or a dying control module. Corrosion inside the socket or connector is another common trouble spot, especially if there’s been moisture inside. Give everything a careful look, clean any rust, and make sure the wiring isn’t pinched or damaged, particularly near the trunk hinges. Popping in a new bulb is always a good first move, but if the issue sticks around, then checking the wiring or having a tech take a peek might be next.
How Can I Fix A Loose BMW 440i Tail Light?
A loose BMW 440i tail light is often due to bolts that have shaken loose or weren’t tightened enough during an earlier fix. Open your trunk, pull back the liner, and find the mounting bolts for the light—tighten them evenly but don’t overtighten. If the light still wobbles, check for broken tabs or cracks in the mounting area, as these may call for a new assembly. Once everything’s snugged up, your tail light should sit flush and stay put.
Why Buy Your BMW 440i Tail Light From AutohausAZ?
Ordering your BMW 440i tail light from AutohausAZ means you get solid value and fast service. The prices are competitive, shipping is speedy, and if something’s not quite right, returning it is simple. You’ll save both time and money, and their customer support team makes the whole process smooth. Grab yours at AutohausAZ and get back on the road without missing a beat.
