BMW 528I Camshaft Position Sensor Parts
Showing 10 out of 10 part(s) found in our catalog.
Brand
Keyword
Subcategory
Mon-Fri 8-4 MST/PST (Arizona Time)
The average price of a BMW 528I camshaft position sensor is between $4.89 and $81.99.
What Are The Symptoms Of A Failing BMW 528I Camshaft Position Sensor?
The signs of a bad BMW 528I camshaft position sensor can sneak up on you. The idle gets shaky, maybe the engine refuses to start one morning, even though it was fine the night before. That dashboard warning light pops up, usually at the worst time, and sometimes the car just doesn’t seem to have the same get-up-and-go. You might notice it’s taking longer for the engine to catch after turning the key. Your fuel gauge seems to drop faster than it used to, too. Once in a while, you’ll hear a misfire, or feel a little stumble as you drive. These issues can match other problems, so hooking the car up to a scanner is the fastest way to see if the sensor is the source.
Where Is The BMW 528I Camshaft Position Sensor Located?
You’ll usually find the BMW 528I camshaft position sensor right on the cylinder head, tucked in front near the timing cover. Pop off the plastic engine shroud, if you have one—it comes off with a few clips or screws. Depending on your engine code, you may need to move aside a hose or two, maybe even the air intake. The sensor itself is compact, hooked in with a wire and one hold-down bolt. Always disconnect the battery before you start digging around under the hood, just in case.
How Do You Replace The BMW 528I Camshaft Position Sensor?
Changing out the BMW 528I camshaft position sensor doesn’t have to eat up your Saturday. Start by removing the negative battery cable. Track down the sensor—look for that wire leading to a small, metal bodied piece on the head. Unplug the connector, then take out the bolt with a socket. Sometimes the sensor sticks, so twist gently while you pull it free. Wipe the area clean, and inspect the O-ring. Slide the new sensor in, bolt it down, click the harness back on. Reconnect your battery, then clear any codes with a scan tool. It’s always good to make sure the check engine light stays off after the fix.
Can Driving With A Bad BMW 528I Camshaft Position Sensor Cause Engine Damage?
Driving with a failing BMW 528I camshaft position sensor can turn an easy fix into a headache. The car may stall in traffic, or it might run rough enough to make you nervous. Most of the time, you won’t ruin the engine right away, but you could stress out other parts. Misfires don’t do your catalytic converter any favors. If you let the problem drag on long enough, you might be looking at bigger repairs down the road. Don’t wait. It’s better to swap the sensor before a simple job turns expensive.
How Much Does It Cost To Replace The BMW 528I Camshaft Position Sensor?
Replacing a BMW 528I camshaft position sensor isn’t going to set you back as much as some repairs. Sensors usually run between $80 and $150. If a mechanic handles it for you, add another $100 to $200 in labor, depending on their rates and where you live. Many people handle it themselves in an hour or less. If you do it on your own, spend the money on a quality part—it’ll last longer and cause you fewer headaches down the line.
Why Choose AutohausAZ For Your BMW 528I Camshaft Position Sensor?
AutohausAZ keeps things straightforward and honest. They stock high-quality BMW 528I camshaft position sensors at prices that don’t make you wince. Shipping is quick, and the return process is easy if you happen to order the wrong part. The support team actually listens, and doesn’t just read from a script. That way, you get the sensor you need, and you get back on the road faster. No one wants downtime. With genuinely fair prices, reliable parts, and help when you need it, AutohausAZ stands out from the crowd. Fixing your BMW shouldn’t feel stressful—and here, it doesn’t have to.
