BMW 550I Tail Light Parts
Showing 11 out of 11 part(s) found in our catalog.
Brand
Keyword
Category
Select category below to view parts.
Mon-Fri 8-4 MST/PST (Arizona Time)
Based on industry averages you can expect to pay between $0.89 and $141.99 for a BMW 550I tail light.
How Do I Replace My BMW 550I Tail Light?
Swapping out the BMW 550I tail light is a straightforward job for most DIYers. Start by opening the trunk and finding the rear light access panel. You’ll usually spot a couple of screws—grab a Phillips screwdriver to loosen them. Next, gently unplug the wiring harness from the back of the tail light assembly. Remove the bolts holding the housing, then carefully pull out the unit. To install the new light, just reverse these steps. Double-check that every bulb works and that the new light fits snugly—this helps keep water out. Finish by making sure your brake lights and signals are working properly before you drive off.
Why Is My BMW 550I Tail Light Not Working?
A BMW 550I tail light that isn’t working usually comes down to a burned-out bulb, which is a quick fix. But sometimes, a blown fuse, damaged wiring, or even corrosion in the socket could be the culprit, especially if the trunk’s ever gotten wet. Check the basics first: the bulbs, the fuses, and the connections. If those seem fine and you’re still having trouble, there could be an electrical or computer issue at play. In that case, it’s a good idea to have a professional take a look.
What Causes Condensation Inside The BMW 550I Tail Light?
It’s not uncommon for moisture to show up in your BMW 550I tail light. Usually, a cracked seal or a gap between the lens and the housing is to blame—especially after a downpour or a trip through the car wash. Water gets inside, fogging up the lens or pooling at the bottom. If this goes unchecked, it can mess with the wiring and the bulbs. Check for any visible cracks or missing seals and replace them if you spot an issue. Catching it early can save you a bigger headache later.
Can I Upgrade To LED On My BMW 550I Tail Light?
Upgrading to LED BMW 550I tail lights is a popular move. There are plenty of kits out there designed to fit specific years and models. Some plug right in, while others might need a bit of coding so the car doesn’t show an error message—since LEDs draw less power than standard bulbs. The benefits? Brighter, quicker response, and a fresh look. Just make sure your upgrade plays by the rules in your area, since not all custom lights are street legal everywhere.
Why Does My BMW 550I Tail Light Have Hyperflash Or Error Messages?
If your new BMW 550I tail light is causing hyperflash or throwing error messages, it’s probably a resistance issue—especially if you switched to LEDs. The car is looking for a certain power draw, and when it’s missing, it reacts with fast blinking or dashboard warnings. You can solve this by adding resistors or choosing LEDs with built-in load resistors. Some cars may also need a quick software update. If the issue keeps coming back, recheck your connections or check in with someone who specializes in BMW electrical systems.
Where Can You Buy An Affordable BMW 550I Tail Light?
You don’t need to spend a fortune to get a new BMW 550I tail light. AutohausAZ makes it easy to find exactly what you need, with competitive prices and fast shipping to get you back on the road quickly. Changed your mind or ordered the wrong part? Their return process is simple and hassle-free. With a focus on customer service and value, replacing your tail light doesn’t have to be a stressful or expensive process.
