BMW 740I Oil Filter Parts
Showing 20 out of 66 part(s) found in our catalog.
Brand
Keyword
Category
Select category below to view parts.
Mon-Fri 8-4 MST/PST (Arizona Time)
BMW 740I oil filter typically cost between $7.19 and $338.99.
The BMW 740I oil filter helps remove impurities, contaminants, and debris from the engine oil as it circulates through the engine. It helps maintain the quality of the engine oil by preventing buildup of harmful particles that can cause engine wear and tear. This helps increase the lifespan of the engine and ensure better performance.
Signs of a Clogged BMW 740I Oil Filter
- Poor engine performance: The engine might start to run rough or become sluggish when accelerating.
- Low oil pressure: Reduced oil pressure can be an early warning that the oil filter is clogged. If the oil pressure gauge or warning light indicates low oil pressure, it could be due to a blocked oil filter.
- Engine warning light: A clogged oil filter can trigger the check engine light on the dashboard.
- Metallic sounds: A clogged oil filter can cause metal-to-metal contact as parts grind against each other, leading to loud noises from the engine.
- Dirty oil: If the oil appears dirty or black, it could indicate a clogged oil filter. The oil might also contain bits of debris or metal particles, indicating the engine has significant wear and tear.
If you notice any of these signs, it's essential to have the oil filter checked and replaced right away. Continuing to drive with a blocked oil filter can damage the engine and cause expensive repairs.
Recommended OEM Brands For BMW 740I Oil Filter
Original Equipment Manufacturer (OEM) oil filters for a BMW 740I can vary depending on the specific model and year of the vehicle. Some of the most common OEM brands for oil filters on a BMW 740I include Mann-Filter, Hengst, Mahle, and Bosch.
Mann-Filter is a German-based company that specializes in producing high-quality filters for various vehicles including BMW. Their oil filters are known for their precise fit, superior filtration, and extended service life. Mann-Filter oil filters are designed to capture small particles and debris that can cause engine damage while ensuring consistent oil flow rates.
Hengst is another German-based company that produces OEM oil filters for BMWs. They utilize the latest filter technology and materials to provide long-lasting protection to your engine. Hengst oil filters feature an efficient design that ensures high dirt-holding capacity and optimal oil flow.
Mahle is a renowned filter manufacturer with a global presence. They offer different types of oil filters such as spin-on, cartridge, and full-flow filters. Mahle oil filters are designed to meet or exceed the original equipment specifications and offer superior filtration efficiency and engine protection.
Bosch is a reputable brand that produces high-quality automotive parts including oil filters. They offer a wide range of oil filters for BMWs that meet or exceed OEM standards. Bosch oil filters utilize advanced filtration technology to trap contaminants and ensure reliable engine performance.
In conclusion, choosing the right OEM oil filter brand for your BMW 740I is essential for proper engine performance and durability. It is recommended to use genuine OEM oil filters from reputable brands for optimal results.
BMW 740I Oil Filter Replacement Interval
It is recommended to replace the oil filter on a BMW 740I during each oil change, which is typically every 7,500-10,000 miles or once a year, whichever comes first.
Replacing the Oil Filter on Your BMW 740I
- Locate the oil filter: In a BMW 740I, the oil filter is located to the right of the engine, towards the front.
- Drain the oil: Before replacing the oil filter, it's important to drain out all the old oil from the car. Place a drain pan under the car and remove the oil drain plug to let out the oil.
- Remove the old oil filter: Use a wrench to loosen and remove the old oil filter from its holder.
- Prepare the new oil filter: Apply a thin layer of oil to the gasket of the new oil filter.
- Install the new oil filter: Screw the new oil filter onto the holder by hand until it is snug, then tighten it with a wrench.
- Add new oil: Pour in the recommended amount of new oil using a funnel.
- Check the oil level: Once everything is done, check the oil level on the dipstick to ensure that it has been topped off properly.
- Dispose of the old oil filter: Make sure to dispose of the old oil filter and the drained oil properly, as they can be hazardous.
Buying a BMW 740I Oil Filter Online
At AutohausAZ, we understand how important it is to keep your BMW 740I running smoothly with regular maintenance. That's why we offer a wide selection of high-quality oil filters that are specifically designed for BMW vehicles.
When you shop with us, you can rest assured that you're getting the best possible products at competitive prices. Our oil filters are manufactured by top brands and are engineered to provide superior filtration, ensuring that your engine stays clean and protected from harmful contaminants.
In addition to our quality products, we also offer exceptional customer service. Our knowledgeable team is always available to answer any questions you may have and help you find the right oil filter for your specific BMW 740I model.
By shopping with AutohausAZ, you can save time and avoid the hassle of having to search for the right oil filter elsewhere. We make it easy and convenient to order online and have your products shipped directly to your doorstep.
So why wait? Start shopping with us today and experience the many advantages of choosing AutohausAZ for all of your BMW 740I oil filter needs.
