BMW M2 Oil Filter Parts
Showing 20 out of 22 part(s) found in our catalog.
Brand
Keyword
Category
Select category below to view parts.
Mon-Fri 8-4 MST/PST (Arizona Time)
Based on industry averages you can expect to pay between $2.29 and $338.99 for a BMW M2 oil filter.
The BMW M2 oil filter is responsible for removing contaminants and debris from the engine oil as it circulates through the engine. This helps to keep the oil clean and prevent damage to engine components. The oil filter works by trapping particles in a filter element, allowing clean oil to flow freely through the engine. Regular replacement of the oil filter is important in order to ensure maximum engine performance and longevity.
Signs of a Clogged BMW M2 Oil Filter
- Poor engine performance: A clogged oil filter can reduce the flow of oil to the engine, leading to poor performance and reduced power.
- Engine warning light: The engine warning light may come on if there is a problem with the oil filter or oil pressure.
- Metallic sounds: A clogged oil filter can cause metallic sounds from the engine due to lack of lubrication.
- Oil pressure gauge: The oil pressure gauge may indicate low oil pressure if the filter is clogged.
- Oil leaks: A clogged oil filter can cause oil leaks as the pressure builds up and seeks a way out.
If you suspect a clogged oil filter, it's important to have it checked and replaced immediately to avoid engine damage.
Recommended OEM Brands For BMW M2 Oil Filter
The Original Equipment Manufacturer (OEM) is the company that produces parts and equipment for a specific vehicle manufacturer. When it comes to the oil filter on a BMW M2, there are several OEM brands recommended by BMW:
- Mann-Filter: This is a well-known brand that produces high-quality filters for various BMW models. Their filters come with advanced filtration technology that helps to remove contaminants from the engine oil, improving engine performance and prolonging the life of the engine.
- Mahle: This is another reputable brand that produces oil filters for BMW M2. Their filters are designed to meet BMW's strict quality standards and are made with high-grade materials to ensure optimum performance and durability.
- Hengst: This is a German-based company that specializes in producing filters for European cars. Their oil filters for BMW M2 are known for their superior quality and high-performance capabilities.
- Bosch: This is a popular brand that is known for producing automotive parts and accessories. Bosch oil filters for BMW M2 are designed to maintain the high-performance standards set by BMW, ensuring maximum engine protection and long-lasting performance.
It is essential to use OEM brands for the oil filter on a BMW M2 because they are specifically designed to meet the requirements of the vehicle. Using aftermarket filters may lead to engine damage, decreased fuel efficiency, and other issues. Therefore, it is important to choose a reputable OEM brand when replacing the oil filter on a BMW M2.
BMW M2 Oil Filter Replacement Interval
The BMW M2 oil filter should be replaced every time you do an oil change, which is typically every 7,500-10,000 miles or once a year, whichever comes first. It is important to follow the manufacturer's recommended maintenance schedule for optimal performance and longevity of your vehicle.
Replacing the Oil Filter on Your BMW M2
- Locate the oil filter housing: The oil filter on a BMW M2 is located underneath the car's engine compartment.
- Drain the oil: Place an oil drain pan under the car and remove the oil filter cap to allow the oil to drain out.
- Remove the old oil filter: Use an oil filter wrench to loosen and remove the old oil filter from the housing.
- Clean the oil filter housing: Use a clean cloth to wipe the housing and remove any remaining debris.
- Install the new oil filter: Apply a thin layer of fresh oil on the rubber seal of the new filter and then screw it into the housing.
- Replace the oil filter cap: The cap should be threaded back onto the housing and tightened securely.
- Refill with new oil: Pour the recommended amount of fresh oil into the engine using a funnel.
- Start the engine: Turn on the engine and let it run for a few minutes to check for any leaks.
- Check the oil level: Use the dipstick to ensure that the oil level is at the appropriate level.
- Dispose of old oil filter: Properly dispose of the used oil filter and the drained oil.
Buying a BMW M2 Oil Filter Online
At AutohausAZ, we offer a wide range of BMW M2 oil filters that have several advantages for our customers. First and foremost, we are committed to providing high-quality products that ensure the best performance for your vehicle. Our oil filters are designed to meet or exceed the original equipment manufacturer's (OEM) standards, ensuring maximum efficiency and protection for your BMW M2 engine.
Another advantage of shopping with us is our competitive pricing. We understand that maintaining your vehicle can be costly, which is why we offer affordable prices for BMW M2 oil filters that are comparable to those of other retailers. This enables you to keep your vehicle running at its best without breaking the bank.
Additionally, we also offer a variety of shipping options to suit your needs. Whether you need your BMW M2 oil filter delivered quickly or you prefer a more cost-effective shipping method, we have options available that will suit your preferences. Our goal is to provide our customers with a hassle-free shopping experience that includes fast and reliable delivery.
In conclusion, when you shop for BMW M2 oil filters at AutohausAZ, you can be confident that you are getting high-quality products at a competitive price, with a wide range of shipping options available to suit your needs.
