BMW X1 Oil Filter Parts
Showing 20 out of 51 part(s) found in our catalog.
Brand
Keyword
Category
Select category below to view parts.
Mon-Fri 8-4 MST/PST (Arizona Time)
The average cost of a BMW X1 oil filter is between $2.29 and $338.99.
The BMW X1 oil filter serves the purpose of removing contaminants and impurities from the engine oil. The filter is designed to trap and hold foreign particles such as dirt, metal shavings, and other debris that can damage the engine components. The oil filter plays a crucial role in maintaining the quality and performance of the engine oil, which in turn helps to prolong the life of the engine. Over time, the oil filter will become clogged with debris and need to be replaced to ensure optimal engine function.
Signs of a Clogged BMW X1 Oil Filter
The signs of a clogged BMW X1 oil filter may include:
- Reduced engine performance: A clogged oil filter can affect the engine's performance by reducing the flow of oil to the engine resulting in poor acceleration and sluggishness.
- Engine warning light: The engine warning light may come on if the oil pressure drops due to a clogged oil filter.
- Metallic sound: A clogged oil filter can cause metal-on-metal friction due to inadequate lubrication, leading to strange sounds from the engine.
- Oil leaks: An oil leak is another sign of a clogged oil filter. When the oil filter is clogged, oil pressure increases and weakens the filter housing seal, causing oil to leak.
- Oil pressure gauge reading: A clogged oil filter can cause the oil pressure to drop below the recommended level, resulting in incorrect readings on the oil pressure gauge.
If you observe any of these signs, it's essential to have your BMW X1 checked by a professional mechanic to diagnose the problem with your oil filter.
Recommended OEM Brands For BMW X1 Oil Filter
Original Equipment Manufacturer (OEM) brands are companies that produce parts and components for specific car manufacturers. These brands are typically trusted by car companies and are often used for factory-installed parts.
In the case of the BMW X1, the OEM brands for oil filters depend on the model year and engine type of the vehicle. Some common OEM brands for the BMW X1 include Mann-Filter, Hengst, and Mahle.
Mann-Filter is a German brand known for producing high-quality oil filters for BMW vehicles. They use premium filter materials and advanced filtration technology to improve engine performance and reduce engine wear.
Hengst is another German brand that produces OEM oil filters for BMW cars. Hengst filters are designed to meet or exceed the original equipment specifications, ensuring optimal engine protection and longevity.
Mahle is a global corporation with over 160 years of experience in the automotive industry. They produce a range of OE oil filters for BMW engines that are engineered to exacting standards and provide superior filtration and protection.
Overall, when it comes to choosing an OEM brand for your BMW X1's oil filter, it is important to choose a trusted and reputable brand that meets the requirements of your vehicle's engine.
BMW X1 Oil Filter Replacement Interval
It is recommended to replace the oil filter in a BMW X1 every 10,000 miles or once a year, whichever comes first. However, it is always best to follow the manufacturer's recommended maintenance schedule outlined in the owner's manual.
Replacing the Oil Filter on Your BMW X1
- Gather the necessary supplies: oil filter wrench, replacement oil filter, drain plug washer, and engine oil.
- Warm up the engine: Run the engine for a few minutes to warm up the oil.
- Drain the oil: Locate the oil drain plug underneath the vehicle and remove it using a wrench. Allow the oil to drain into a container.
- Remove the oil filter: Locate the oil filter housing on the engine block (usually near the oil pan). Use the oil filter wrench to loosen the housing cap while holding the bottom of the housing with your other hand. Remove the cap and the old filter element.
- Prepare the new filter: Apply a thin layer of new engine oil to the gasket on the new filter element.
- Install the new filter: Insert the new filter element into the housing cap and screw it onto the engine block. Tighten it by hand until snug, then use the oil filter wrench to tighten it another 1/4 turn.
- Replace the drain plug washer: Replace the drain plug washer with a new one if it is damaged or worn.
- Refill with new oil: Open the oil filler cap on the engine and pour in the recommended amount of new engine oil. Check the oil level with the dipstick and add more oil as needed until it reaches the full mark.
- Start the engine: Start the engine and check for any leaks around the oil filter and drain plug.
- Reset the oil change indicator: If your BMW has an oil change indicator, reset it according to the owner’s manual instructions.
That’s it! You’ve successfully replaced the oil filter in your BMW X1.
Buying a BMW X1 Oil Filter Online
At AutohausAZ, our customers can experience the convenience of shopping for BMW X1 oil filters right from the comfort of their own homes. In addition, our huge inventory of OEM and aftermarket parts guarantees that shoppers will find the perfect oil filter for their BMW X1 model.
Our prices are also highly competitive, offering customers a great value for their money. Furthermore, our experienced and knowledgeable customer service team is always available to answer any questions or concerns that customers may have.
Shopping at AutohausAZ means enjoying the benefits of a hassle-free online shopping experience that saves time and effort while also providing access to an enormous array of auto parts and accessories. And with our quick and efficient shipping, customers can receive their BMW X1 oil filter in no time at all, ensuring their vehicle's engine stays running smoothly and efficiently.
