BMW X3 Oil Filter Parts
Showing 20 out of 70 part(s) found in our catalog.
Brand
Keyword
Category
Select category below to view parts.
Mon-Fri 8-4 MST/PST (Arizona Time)
BMW X3 oil filter typically cost between $0.59 and $287.99.
Where Is The BMW X3 Oil Filter Located?
You’ll usually spot the BMW X3 oil filter right on top of the engine. Pop the hood, take off the engine cover, and you’ll see a round, black cap up front or just off to the center. Under that cap sits the oil filter. No crawling under the car or wrestling with tight spaces, just a straightforward job most DIY folks can handle. The top-side location keeps things clean and easy.
What Size Wrench Or Socket Is Needed To Remove The BMW X3 Oil Filter?
Most BMW X3 oil filter housing caps call for a 27mm or a 32mm socket. It depends on the year and engine—sometimes you’ll need to check before grabbing your tools. Some folks use a specialty oil filter cap tool for a snug fit. Check the top of your filter housing or flip through the owner’s guide and you’ll know which you need. A good fit matters; using the wrong one could crack the cap or cause a leak down the road. When you put it back, don’t wrench it down as tight as you can; go to the listed torque. That keeps threads happy and oil where it belongs.
How Often Should The BMW X3 Oil Filter Be Changed?
Best practice on the BMW X3 oil filter: swap it every time you change the oil. BMW says anywhere from 7,500 to 10,000 miles for regular service, or once a year if you don’t put on many miles. If you do a lot of city driving or make short trips, aim closer to the low end. Old filters lead to dirty oil and engine wear, so don’t let it slide. Grabbing quality oil and a new filter each time just keeps your engine smooth, efficient, and running longer.
What Type Of Oil Filter Should Be Used For The BMW X3?
Stick with OEM or a high-quality aftermarket BMW X3 oil filter from a trusted brand. You get the right fit, and you won’t risk damage from poor filtration or leaks. If you’re skeptical about aftermarket parts, nothing wrong with sticking to the filters BMW uses at the factory. Just don’t go for the cheap stuff—low-budget filters can break down, clog fast, or even let bad stuff back into the oil. A bad filter is more headache than any money saved.
Are There Any Special Tips For Changing The BMW X3 Oil Filter?
A few easy tips make a difference. Always swap the old rubber O-ring on the cap for the new one that comes with the filter, and add a touch of fresh oil to the O-ring so it seals right. Let the oil drain well before you open the filter cap—less mess, fewer headaches. Double-check the new filter sits straight in the housing before you tighten the cap. Use a torque wrench if you have one, just to be sure you’re not over- or under-tightening. When you finish, check for leaks before closing up the hood. Small steps, but they save big trouble.
Why Choose AutohausAZ For Your BMW X3 Oil Filter?
Shopping at AutohausAZ for your BMW X3 oil filter is a whole different experience. We get it—keeping your BMW running right matters. Our shelves are stocked with filters that fit like the factory part, saving you from the headaches of cheap, unreliable brands. Prices? You’ll find solid deals that beat dealer costs but never short-change quality. We know your time matters too, so fast shipping and solid packing are our standard. Not sure you ordered the right part? Our return process is simple and stress-free. And if you have questions, you get to talk with real people, ready to help—not some bot or endless menu system. Let us take care of the details, so you can focus on your next drive. Give us a shot the next time your X3 needs a new filter, and you’ll see why so many BMW drivers stick with us.
