Mercedes 280CE Brake Pad Sensor Parts
Showing 2 out of 2 part(s) found in our catalog.
Brand
Keyword
Subcategory
Mon-Fri 8-4 MST/PST (Arizona Time)
Mercedes 280CE brake pad sensor typically cost between $2.19 and $12.89.
The Mercedes 280CE brake pad sensor is a component of the braking system that serves as a warning indicator. Its purpose is to monitor the thickness of the brake pads and notify the driver when they need to be replaced.
The sensor is typically positioned near the brake pads and consists of a metal contact connected to an electrical wire. As the brake pads wear down over time, the metal contact comes in contact with the rotor or disc. This completes an electrical circuit and triggers a warning light on the dashboard, alerting the driver that the brake pads have reached a critical level and should be inspected or replaced.
By monitoring the brake pad thickness, the sensor helps ensure optimal braking performance and safety by preventing excessive wear or complete pad failure. Regularly replacing worn brake pads is essential for maintaining proper braking efficiency and preventing damage to other braking components.
The Mercedes 280CE typically has two brake pad sensors, one for the front brakes and one for the rear brakes. These sensors help monitor the thickness of the brake pads and alert the driver when they need to be replaced.
Replacing Brake Pad Sensors On A Mercedes 280CE
To replace the brake pad sensor on a Mercedes 280CE, follow these steps:
- Gather the necessary tools and materials: You will need a new brake pad sensor, a socket wrench or suitable wrench, a jack, jack stands, and a wheel chock.
- Engage the parking brake: Ensure that the parking brake is engaged to prevent the vehicle from rolling.
- Loosen the lug nuts: Use a socket wrench or suitable wrench to loosen the lug nuts on the wheel where you will be replacing the brake pad sensor. Do not remove the lug nuts yet.
- Lift the vehicle: Place a jack under the appropriate jacking point (consult your vehicle's manual for the specific location) and lift the wheel off the ground. Once lifted, secure the vehicle with jack stands for added safety.
- Remove the wheel: Fully unfasten the lug nuts and remove the wheel, setting it aside in a safe place.
- Locate the brake pad sensor: The brake pad sensor is typically located near the brake rotor, attached to the brake caliper. Identify its position before proceeding.
- Disconnect the sensor wire: Gently unplug the electrical connector attached to the sensor. Be careful not to damage the wiring or connector.
- Remove the old brake pad sensor: Depending on the design, the sensor may be clipped onto the brake pad or held in place by a retaining screw. Detach the sensor from its mounting point and remove it.
- Install the new brake pad sensor: Position the new sensor in the same location as the old one. If applicable, reattach it using the retaining screw or clip it onto the brake pad. Ensure it is securely fastened.
- Reconnect the sensor wire: Plug the electrical connector back into the corresponding socket of the new sensor. Make sure it is firmly connected.
- Remount the wheel: Place the wheel back onto the wheel hub and hand-tighten the lug nuts. Then use a socket wrench or suitable wrench to fully tighten the lug nuts in a star pattern to ensure even tightening.
- Lower the vehicle: Carefully lower the vehicle using the jack, removing the jack stands as you go. Once lowered, remove the jack.
- Repeat the process for additional wheels: If you need to replace the brake pad sensor on other wheels, repeat steps 3-12 for each wheel.
- Test the brake pad sensor: After replacing all the brake pad sensors, start the vehicle and test the brakes to ensure they are functioning properly. If there are no warning lights or abnormal sounds, the replacement was successful.
- Remember to consult the vehicle's manual or seek professional assistance if you have any doubts or concerns during this process.
Top Mercedes 280CE Brake Pad Sensor Brands for Sale
Bowa:
Bowa is a renowned manufacturer of brake pad sensors for the Mercedes 280CE. With a strong reputation in the automotive industry, Bowa produces high-quality parts that meet and often exceed the standards set by the vehicle manufacturer. Their brake pad sensors are designed to provide accurate and reliable readings, ensuring optimal braking performance and safety. Bowa's commitment to quality and precision makes them a trusted choice for Mercedes owners who value original equipment quality.
Pagid:
Pagid is another well-established manufacturer of brake pad sensors for Mercedes vehicles, including the 280CE. Known for their expertise in braking systems, Pagid produces brake pad sensors that are on par with the vehicle manufacturer's stringent quality requirements. Their sensors are engineered to deliver precise and consistent readings, providing drivers with confidence in their braking performance. Pagid's dedication to excellence and innovation has made them a preferred choice for Mercedes enthusiasts seeking reliable brake pad sensors.
In summary, both Bowa and Pagid are reputable manufacturers that produce top-quality brake pad sensors for the Mercedes 280CE. While Genuine branded parts carry the vehicle manufacturer's name and are manufactured by select auto parts manufacturers, Bowa and Pagid offer original equipment quality alternatives that meet or exceed these high standards. Choosing either of these reliable brands ensures that your brake pad sensors will perform optimally and contribute to a safe driving experience.
Find Great Deals on Mercedes 280CE Brake Pad Sensor
When shopping for Mercedes 280CE brake pad sensor, one can find several advantages at AutohausAZ. Firstly, they offer a wide selection of brake pad sensors specifically designed for the 280CE model. This ensures that customers can easily find the right fit for their vehicle without any hassle.
Additionally, their range of brake pad sensors is made from high-quality materials, ensuring durability and long-lasting performance. This means that customers can have peace of mind knowing that they are purchasing a reliable product that will effectively monitor brake pad wear.
Furthermore, AutohausAZ provides detailed product descriptions and specifications, allowing customers to make informed decisions about their purchases. They understand the importance of accuracy and clarity when it comes to selecting the right brake pad sensor for a Mercedes 280CE.
Moreover, their website is user-friendly, making the shopping experience smooth and convenient. Customers can easily navigate through different categories and find the desired product effortlessly. This saves time and effort, ensuring a seamless purchasing process.
Lastly, AutohausAZ offers competitive prices on their brake pad sensors for the Mercedes 280CE. This allows customers to obtain high-quality products without breaking the bank. By providing affordable options, AutohausAZ prioritizes customer satisfaction and ensures that customers receive the best value for their money.
In conclusion, AutohausAZ offers several advantages when it comes to shopping for a brake pad sensor for the Mercedes 280CE. Their wide selection, quality materials, detailed descriptions, user-friendly website, and competitive prices make them a reliable choice for customers seeking a dependable brake pad sensor for their vehicle.
