Mercedes 420SEL Fuel Injector Parts
Showing 2 out of 2 part(s) found in our catalog.
Brand
Keyword
Subcategory
Mon-Fri 8-4 MST/PST (Arizona Time)
The average cost of a Mercedes 420SEL fuel injector is between $47.79 and $443.76.
The Mercedes 420SEL fuel injector is a crucial component of the fuel injection system in certain models of the Mercedes-Benz 420SEL. It is responsible for delivering fuel into the combustion chamber of the engine in a precise and controlled manner. The injector sprays fuel in a fine mist, allowing for optimal mixing with air before ignition, resulting in improved fuel efficiency and performance.
Signs of Faulty or Worn Mercedes 420SEL Fuel Injector
The most common signs of faulty or worn out fuel injectors in a Mercedes 420SEL may include:
- Rough Idle: An irregular or shaky idle when the vehicle is stopped or in neutral can indicate issues with fuel injectors.
- Engine Misfire: If the engine is misfiring, causing uneven power delivery or a noticeable lack of performance, it could be a sign of a faulty injector.
- Hesitation or Stalling: Difficulty accelerating smoothly, hesitation or sudden stalling while driving may suggest that one or more fuel injectors are not functioning properly.
- Poor Fuel Efficiency: Decreased mileage or a significant drop in fuel efficiency can be a result of inefficient fuel delivery caused by faulty injectors.
- Strong Odor of Fuel: If you notice a strong smell of gasoline inside or outside the vehicle, it might be due to a leaking fuel injector.
- Fuel Leak: Visible fuel leakage around the intake manifold, fuel rail, or fuel injectors is a clear indication of a problem.
- Increased Emissions: Faulty fuel injectors can disrupt the air-fuel mixture, leading to increased emissions and potentially failing an emissions test.
- Hard Starting: Difficulty starting the engine or extended cranking times could be symptomatic of a fuel injector issue.
- Engine Knocking: A knocking sound coming from the engine, especially under load, might be caused by improper fuel delivery from faulty injectors.
If you suspect any of these symptoms in your Mercedes 420SEL, it is recommended to have a professional mechanic diagnose and address the issue promptly to avoid further damage to the engine or related components.
Replacing Mercedes 420SEL Fuel Injectors
To replace the fuel injector in a Mercedes 420SEL, follow these steps:
- Prepare the necessary tools and equipment. You'll need a set of wrenches, socket set, fuel pressure gauge, fuel injector puller, fuel line disconnect tool, new fuel injector(s), and O-rings.
- Ensure safety by disconnecting the negative terminal of the battery to prevent any accidental electrical sparks.
- Relieve the fuel pressure by locating the fuel pump relay in the fuse box or the rear trunk compartment, and remove it. Then, start the engine and let it run until it stalls, using up the remaining fuel pressure.
- Locate the fuel rail and the fuel injectors. The fuel rail is typically attached to the intake manifold, and the injectors are connected to the fuel rail.
- Disconnect the fuel lines from the fuel rail. Use a fuel line disconnect tool to release the retaining clips and gently pull the fuel lines away from the rail.
- Remove the fuel rail by unbolting the mounting bolts. Carefully lift the rail off the intake manifold while being cautious not to damage the injectors or any surrounding components.
- Once the fuel rail is removed, disconnect the electrical connectors from each fuel injector. Gently press on the locking tab and pull the connector away.
- Use a wrench or socket to remove the mounting bolts or clips securing the fuel injectors to the fuel rail. Take note of the orientation of each injector for correct installation of the replacements.
- With the old injectors removed, replace their O-rings with new ones. Lubricate the O-rings with a bit of engine oil to ensure proper sealing.
- Install the new fuel injectors onto the fuel rail, aligning them with the corresponding holes. Secure them in place using the mounting bolts or clips, ensuring a snug fit without overtightening.
- Reconnect the electrical connectors to each fuel injector. Ensure they click into place, indicating a secure connection.
- Place the fuel rail back onto the intake manifold, aligning it with the corresponding ports. Tighten the mounting bolts securely but avoid overtightening.
- Reconnect the fuel lines to the fuel rail by inserting them into the respective ports until you hear an audible click. Wiggle them gently to confirm a secure connection.
- Reinstall the fuel pump relay into the fuse box or rear trunk compartment.
- Reconnect the negative terminal of the battery to restore power.
- Turn the ignition key to "ON" position (without starting the engine) for a few seconds, allowing the fuel pump to pressurize the system.
- Finally, start the engine and check for any fuel leaks. Listen for irregularities in engine performance, ensuring proper fuel delivery to each cylinder.
It's important to note that these steps provide a general guideline, and specific procedures may vary slightly depending on the make, model, and year of your Mercedes 420SEL. Always consult the vehicle's service manual or seek professional assistance if needed.
Typical Lifespan of Mercedes 420SEL Fuel Injectors
The longevity of a Mercedes 420SEL fuel injector can vary depending on various factors such as driving conditions, maintenance, and fuel quality. However, under normal circumstances, fuel injectors can typically last between 50,000 to 100,000 miles before they may require servicing or replacement. It is important to regularly maintain your vehicle and address any fuel system issues promptly to ensure optimal performance and longevity of the fuel injectors.
Mercedes 420SEL Fuel Injectors at Discount Prices
At AutohausAZ, you can experience the convenience of shopping for a Mercedes 420SEL fuel injector with several advantages. Firstly, they offer an extensive range of high-quality fuel injectors specifically designed for your vehicle. This ensures optimal performance and compatibility with your Mercedes 420SEL, giving you peace of mind.
Another advantage is their commitment to providing excellent customer service. They have a team of knowledgeable professionals who are ready to assist you in finding the right fuel injector for your specific needs. Whether you have inquiries or need guidance during the purchasing process, their dedicated staff is there to help.
Furthermore, AutohausAZ stands out for its competitive pricing. They understand that affordability is important to their customers. By offering competitive prices on their fuel injectors, they ensure that you get the best value for your money without compromising on quality.
In addition to their product quality and customer service, AutohausAZ also offers fast and reliable shipping options. Once you've placed your order, you can expect prompt delivery of your Mercedes 420SEL fuel injector, allowing you to get back on the road quickly.
Lastly, AutohausAZ has a user-friendly website that makes shopping for a fuel injector hassle-free. With their intuitive interface, you can easily browse through their selection, compare different options, and make a well-informed decision.
All in all, choosing AutohausAZ as your source for a Mercedes 420SEL fuel injector provides you with access to a wide range of reliable products, exceptional customer service, competitive prices, quick shipping, and a user-friendly website.
